2024 Aluminium Sheet
Aluminium 2024 Sheet is considered the “aircraft” alloy because of its strength. It is readily formed in the annealed condition and may be subsequently heat treated. 2024 Aluminium Sheet possess good machinability and can be machined to a high finish. Since corrosion resistance is relatively low, aluminum alloy 2024 Sheet is commonly used with an anodized finish or in clad form (“Alclad”) with a thin surface layer of high purity aluminum. As an enhanced sheet for fuselage applications, Alclad offers improved fracture toughness and fatigue crack growth while maintaining the strength characteristics of the alloy. ASTM B209 2024 Aluminium Sheet is often used for applications in the aerospace industry.
2024 Aluminium Sheet Temper 0, H32, H34, H38 as per ASTM B209, ASTM-B-209, EN573, and EN485 international standards., UNS A92024, AMS-QQ-A-200/3, Aluminum Alloy 2024 O, T3, T42, T3510, T3511, T81, T8510, or T8511.
Bare: AMS-QQ-A-250/4, ASTM B 209, AMS 4035, AMS 4037.
Alclad: AMS-QQ-A-250/5, ASTM B 209, AMS 4040, AMS 4041, AMS 4042.
Sasa alloy is the leading manufacturer and exporter of 2024 Aluminium Sheet. Supplier of ASTM B209 2024 Aluminium Sheet from 0.5mm to 5mm Thick 1000mm x 1000mm to 2500mm x 1250mm Tempers manufactured in accordance with international standards ASTM B209, ASTM-B-209, EN573, and EN485, check 2024 Aluminium Sheet price. The general widths of 2024 H16 Aluminum sheets are 1000mm, 1250mm and 1500mm, while common lengths are 2000mm, 2500 mm and 3000mm respectively. Wholesale Trader of 2024 Commercial Aluminium Sheet offered by Sasa alloy , China. Stockist of 2024 Aluminium Sheet, H32 2024 Aluminium Stucco Sheet, H38 Commercial 2024 Aluminium Sheet, ASME SB209 2024 Aluminium Patterned Sheet, 2024 Aluminium Embossed Sheet, 2024 Aluminium Extruded Sheet, 2024 Aluminium Sheet and 2024 Aluminium Sheet in China.
Standard Dimensions of 2024 Aluminium Sheet
Standard dimensions (a x b) of Aluminium 2024 Sheet
Aluminium 2024 Sheet up to 9.9 mm
2.000 x 1.000 mm
2.500 x 1.250 mm
3.000 x 1.500 mm
Oversize Aluminium 2024 Sheet
4.000 x 2.000 mm
6.000 x 2.500 mm
8.000 x 2.500 mm
Other dimensions on request
| Alloy | ASTM B209 1050, 1060, 1100, 1235, 3003, 3004, 3105, 5052, 5754, 6061, 8011 |
| Aluminium 2024 Sheet Temper | O, H12, H14, H16, H18, H22, H24, H26, H32, H112 |
| Aluminium 2024 Sheet Thickness | 0.5mm-150mm |
| Aluminium 2024 Sheet Width | 500-2000mm |
| Aluminium 2024 Sheet Length | to clients’ requirement |
| Aluminium 2024 Sheet Coating | Polyester, Fluorocarbon, polyurethane and epoxy coating |
| 2024 Aluminium Sheet Coating finish | PVDF, POLYESTER(PE) |
| Surface | Bright, polished, hair line, brush, sand blast, checkered, embossed, etching, etc. |
| Gloss | Meet the customer requirement |
| Total coating thickness | PVDF coating: More than 25 micron; Polyester coating: More than 18 micron |
| Coating hardness | (pencil hardness) more than 2H |
| Coating adhesive | No lower than1st grade |
| Impact resistance | No cracking or peeling (50kg/cm, ASTMD-2794: 1993) |
| Flexibility (T-bend) | 2T |
| MEK resistance | More than 10 |
| Available Aluminium 2024 Sheet Stock Sizes | 1ft x 1ft, 1ft x 2ft, 1ft x 4ft, 2ft x 2ft, 2ft x 4ft, 4ft x 4ft, 4ft x 8ft, 4ft x 10ft or Cut to Size or Custom Shape. |
| Aluminium 2024 Sheet Delivery Time | 30-60 days after receiving the prepayment |
| Aluminium 2024 Sheet Packaging Details | Standard export package. One pallet is about 2-3 ton.Two steel belts in width and three in width. One 20GP container can load about 18-20 tons Aluminium 2024 Sheet. One 40GP container can load about 24 tons Aluminium 2024 Sheet |
| ASTM B209 Alloy 2024 Outer packing | Export standard, wooden pallet |
| Bottom side Aluminium 2024 Sheet is coated with protective polyester material, thickness more than 6 micron | |
| Export to | Singapore, Indonesia, Ukraine, Korea, Thailand, Vietnam, Saudi Arabia, Brazil, Spain, Canada, USA, Egypt, Iran, China, Kuwait, Dubai, Oman, Kuwait, Peru, Mexico, Iraq, Russia, Malaysia, etc. |
2024 Aluminium Sheet Products Show:
| 2024 Aluminium Sheets Product Range | ||||
|---|---|---|---|---|
| Alloy No. | Thickness (mm) |
Width (mm) |
Length (mm) |
Temper |
| A1050, A1060, A1070, A1100 | 0.2-5.0 | 20-2200 | 20-8000 | O, H12, H22, H14, H16, H18, H24, H26 |
| A3003, A3105, A3004 | 0.2-5.0 | 20-2200 | 20-8000 | O, H14, H18, H24 |
| A5052, A5005, A5083, A5086, A5754 | 0.2-5.0 | 20-2200 | 20-8000 | O, H18, H24, H32, H34, H111, H112 |
| A6061, A6082, A6063 | 0.2-5.0 | 20-2200 | 20-8000 | T4, T6, T651 |
| A8011 | 0.2-5.0 | 20-2200 | 20-8000 | O, H12, H22, H14, H16, H18, H24, H26 |
Aluminium 2024 Sheets Manufacturer in China:
1100-H14 Aluminum Sheet: ASTM-B-209
2024-T3 ALCLAD Aluminum Sheet: AMS-QQ-A-205/5, ASTM-B-209, AMS-4041
2024-T3 BARE Aluminum Sheet: AMS-QQ-A-205/5, ASTM-B-209, AMS-4037
2219-T6 Aluminum Sheet:
2219-O Aluminum Sheet: AMS-QQ-A-250/30
3003-H14 Aluminum Sheet: ASTM-B-209
3003-O Aluminum Sheet: ASTM-B-209
4047-F Aluminum Sheet: AMS-4185, BAlSi-4
5052-H32 Aluminum Sheet: ASTM-B-209, AMS-4016
5052-H38 Aluminum Sheet: ASTM-B-209
5052-O Aluminum Sheet: ASTM-B-209, AMS-4015
6061-O Aluminum Sheet: ASTM-B-209, AMS-4025
6061-T4 Aluminum Sheet: ASTM-B-209, AMS-4026
6061-T6 Aluminum Sheet: ASTM-B-209, AMS 4027
7075-T6 Aluminum Sheet: AMS-QQ-A-250/12, AMS-4045
7075-O ALCLAD Aluminum Sheet: ASTM-B-209
7075-O BARE Aluminum Sheet: AMS-QQ-A-250/12, AMS-4045
Aluminum Specular Lighting Sheet
| ALLOYS | SPECIFICATIONS |
|---|---|
| 1100 | AMS-4001, 4003, QQ-A-250/1 |
| 2014-BARE | AMS-4028, 4029 |
| 2014-ALCLAD | QQ-A-250/3 |
| 2024-BARE | AMS-4035,37, QQ-A-250/4 |
| 2024-ALCLAD | AMS-4040, 41, QQ-A-250/5 |
| 2124 | AMS-4101, QQ-A-250/29 |
| 2219 | AMS-4031, 94, 95, QQ-A-250/30 |
| 3003 | AMS-4006, 4008, QQ-A-250/2 |
| 5052 | AMS-4015, 16, 17, QQ-A-250/8 |
| 6013 | AMS-4347, 4216 |
| 6061 | AMS-4025, 26, 27, QQ-A-250/11 |
| 7050 | AMS-4050, 4201, BMS-7-194 |
| 7075-BARE | AMS-4044, 45, QQ-A-250/12 |
| 7075-ALCLAD | AMS-4048, 49, QQ-A-250/13 |
| 7178-BARE | QQ-A-250/14 |
| 7178-ALCLAD | QQ-A-250/15 |
| 7475 | AMS-4084, 4085 |
| Sizes: | .008 to .249 x R/W x R/L .250 to 18.00 x R/W x R/L |
Please note: Other alloys available upon request
* Special Tolerances Available
* Polishing & PVC Protected
Standard Specification of 2024 Aluminium Sheet
Standards and specifications by country
| Specification | Alloy | Temper | Company |
|---|---|---|---|
| Europe | |||
| EN 2089/2395 | 2014A | T6(T62)/T4(T42) | |
| EN 2087/2088 | 2014A clad | T6(T62)/T4(T42) | |
| EN 4101 | 2024 | T4 | |
| EN 2090/2091/2703/4001 | 2024 clad cmq | T3/T4/T4(T42)/T351 | |
| EN 3474/3997/3998/3999 | 2024 cmq | T81/T3/T4(T42)/T351 | |
| EN 2694/EN 3341 | 6061 | T6(T62)/T4(T42) | |
| EN 4449/4450 | 7050 | T76/F(T762) | |
| EN 2696 | 7075 | T6(T62) | |
| EN 2092 | 7075 clad | T6(T62) | |
| EN 2802/3333 | 7475 | T761/F(T762) | |
| EN 2803/3332 | 7475 clad | T761/F(T762) | |
| France | |||
| AIR 9048.010/.030/ | 2014 | F(T42)/F(T62)/T4/ | |
| .020/.040/.050 | 2014 | T6/T451 | |
| AIR 9048.060/.080/.070/.090 | 2014 clad | F(T42)/F(T62)/T4/T6 | |
| AIR 9048.100/.110/.120 | 2024 | ||
| AIR 9048.130/.140 | 2024 clad | F(T42)/T3 | |
| AIR 9048.150 | 2618A | H28(T62) | |
| AIR 9048.170 | 2618A clad | H28(T62) | |
| AIR 9048.190/.200 | 5086 | O, H111/H22, H32 | |
| AIR 9048.210/.220/.230/.240 | 6061 | O, H111(T42)/T4/ O, H111(T62)/T6 | |
| AIR 9048.260/.270 | 7075 | T6/T76 | |
| AIR 9048.280 | 7075 clad | T6 | |
| AIR 9048.290 | 7475 | T76 | Boeing |
| Germany | |||
| W.-Nr. 3.1254 | 2014A | T4, T6 | |
| W.-Nr. 3.1354 | 2024 | O(T42), T3 | |
| W.-Nr. 3.1364 | 2024 clad | O(T42), T3 | |
| W.-Nr. 3.3214 | 6061 | O(T62), T6 | |
| W.-Nr. 3.4364 | 7075 | T6 | |
| W.-Nr. 3.4374 | 7075 clad | O(T62), T6 | |
| W.-Nr. 3.4377 | 7475 clad | T76 | |
| UK | |||
| BS L16/17 | 1200 | H4/O | |
| BS L156/157/158*/159* | 2014A | ||
| 158*/159* | 2014A clad | (T42)(T62) | BAE Systems |
| BS L163/164/165 | 2014A clad | T3/F(T42), T4/T6 | |
| BS L166*/167* | 2014A clad | F(T42), T4/T6 | |
| BS L109/110 | 2024 clad | T3/F(T42) | |
| DTD5070 | 2618A clad | T6 | |
| BS L59/60/61 | 3103 | H6/H2/O | |
| BS L80/81 | 5251 | O/H6 | |
| BS L113 | 6082 | T4, T6 | |
| BS L88 | 7075 clad | T6 | |
| USA | |||
| AMS QQ-A-250/3 | 2014 clad | O, T4, T6 | |
| AMS QQ-A-250/4 | 2024 | O, T3 | |
| AMS 4037 | 2024 | T3 | |
| AMS QQ-A-250/5 | 2024 clad | O, T3 | |
| AMS 4041 | 2024 clad | T3 | |
| AMS QQ-A-250/30 | 2219 | O(T62), T31(T81), T37(T87) | |
| AMS QQ-A-250/2 | 3003 | O, H14 | |
| AMS 4347 | 6013 | T4 | |
| AMS 4216 | 6013 | T6 | |
| AMS 4025/4026/4027 | 6061 | O, F, T4, T42, T45, T6, T62, T651 | |
| AMS QQ-A-250/12 | 7075 | O, T6, T73 | |
| AMS QQ-A-250/24 | 7075 | T76 | |
| AMS QQ-A-250/13 | 7075 clad | O, T6, T73 | |
| AMS QQ-A-250/26 | 7075 clad with 7011 | T76 | |
| AMS QQ-A-250/25 | 7075 clad with 7072 | T76 | |
| European Standard | BS (OLD) | USA (AA) | GERMANY (DIN) | ISO | IS | Canadian |
|---|---|---|---|---|---|---|
| EN AW-1050 A | 1E | 1050 | Al99.5 | Al99.5 | 19500, 19501 | 1 S |
| EN AW-1070 A | – | 1070 | Al-99.7 | Al-99.7 | 19700 | – |
| EN AW-1100 | IC | 1100 | Al-99.0 | Al-99.0 | 19000 | 2 S |
| EN AW-2011 | FC1 | 2011 | AlCuBiPb | AlCu6BiPb | – | 28S |
| EN AW-2014 | HE15 | 2014 | AlCuSiMn | AlCu4SiMg | 24345 | B26S |
| EN AW-2024 | – | 2024 | AlCuMg2 | AlCu4Mg1 | – | 24 S |
| EN AW-3003 | N3 | 3003 | AlMnCu | AlMn1Cu | 31000 | 3 S |
| EN AW-3103 | – | 3103 | – | AlMn1 | – | – |
| EN AW-6101A | E91E | 6101 | E AlMgSi 0.5 | E AlMgSi(A) | 63401 | D50S |
| EN AW-6005 | – | 6005 | AlMgSi0.7 | AlSiMg | 62400 | C51S |
| EN AW-6351 | HE30 | 6351 | AlMgSi1 | AlSiMg0.5Mn | 64430 | B51S |
| EN AW-6060 | – | 6060 | AlMgSi 0.5 | AlMgSi | – | – |
| EN AW-6061 | HE20 | 6061 | AlMgSiCu | AlMg1SiCu | 65032 | 65S |
| EN AW-6063 | HE9 | 6063 | AlMgSi0.5 | AlMg0.7Si | 63400 | 50S |
| EN AW-6082 | HE30 | 6351 | AlMgSi1 | AlSi1MgMn | 64430 | B51S |
2024 Aluminium Sheet Sizes
| Sizes (mm) | Theoretical Mass KG/sheet |
|---|---|
| 2000 X 1000 X 0.5 | 2500 X 1250 X 0.5 |
| 2000 X 1000 X 0.7 | 2500 X 1250 X 0.7 |
| 2000 X 1000 X 0.9 | 2500 X 1250 X 0.9 |
| 2000 X 1000 X 1.2 | 2500 X 1250 X 1.2 |
| 3000 X 1500 X 1.2 | 2000 X 1000 X 1.6 |
| 2500 X 1250 X 1.6 | 3000 X 1500 X 1.6 |
| 2000 X 1000 X 2.0 | 2500 X 1250 X 2.0 |
| 3000 X 1500 X 2.0 | 2500 X 1250 X 2.5 |
| 2.79 | 4.36 |
| 3.91 | 6.10 |
| 5.02 | 7.85 |
| 6.74 | 10.46 |
| 15.01 | 8.93 |
| 13.95 | 20.09 |
| 11.16 | 17.44 |
| 25.11 | 21.80 |
2024 Aluminium Sheet Weight Chart
Width: 1.000 mm | Length: 2.000 mm
| Product | Thickness | Weight |
|---|---|---|
| 2024 Aluminium Sheet | 0,30 mm | 0,810 Kg/m2 |
| 2024 Aluminium Sheet | 0,40 mm | 1,080 Kg/m2 |
| 2024 Aluminium Sheet | 0,50 mm | 1,350 Kg/m2 |
| 2024 Aluminium Sheet | 0,60 mm | 1,620 Kg/m2 |
| 2024 Aluminium Sheet | 0,70 mm | 1,890 Kg/m2 |
| 2024 Aluminium Sheet | 0,80 mm | 2,160 Kg/m2 |
| 2024 Aluminium Sheet | 0,90 mm | 2,430 Kg/m2 |
| 2024 Aluminium Sheet | 1,00 mm | 2,700 Kg/m2 |
| 2024 Aluminium Sheet | 1,20 mm | 3,240 Kg/m2 |
| 2024 Aluminium Sheet | 1,40 mm | 3,780 Kg/m2 |
| 2024 Aluminium Sheet | 1,50 mm | 4,050 Kg/m2 |
| 2024 Aluminium Sheet | 1,60 mm | 4,320 Kg/m2 |
| 2024 Aluminium Sheet | 1,80 mm | 4,860 Kg/m2 |
| 2024 Aluminium Sheet | 2,00 mm | 5,400 Kg/m2 |
| 2024 Aluminium Sheet | 2,20 mm | 5,940 Kg/m2 |
| 2024 Aluminium Sheet | 2,50 mm | 6,750 Kg/m2 |
| 2024 Aluminium Sheet | 3,00 mm | 8,100 Kg/m2 |
| 2024 Aluminium Sheet | 4,00 mm | 10,800 Kg/m2 |
| 2024 Aluminium Sheet | 5,00 mm | 13,500 Kg/m2 |
| 2024 Aluminium Sheet | 6,00 mm | 16,200 Kg/m2 |
| 2024 Aluminium Sheet | 10,00 mm | 27,000 Kg/m2 |
| 2024 Aluminium Sheet | 12,00 mm | 32,400 Kg/m2 |
| 2024 Aluminium Sheet | 15,00 mm | 40,500 Kg/m2 |
| 2024 Aluminium Sheet | 20,00 mm | 54,000 Kg/m2 |
2024 Aluminium Sheet Chemical Composition
| Alloy | % Si |
% Mg |
% Mn |
% Cu |
% Fe |
% Cr |
% Zn |
% Ti |
% Others |
% Al |
| EN AW-2024 | 0.50 Max | 1.20 -1.80 | 0.30 – 0.90 | 3.80 – 4.90 | 0.50 Max | 0.10 Max | 0.25 Max | 0.15 Max | 0.15 Max | Remainder |
Aluminium 2024 Sheet Mechanical Properties
| Alloy | % Si |
% Mg |
% Mn |
% Cu |
% Fe |
% Cr |
% Zn |
% Ti |
% Others |
% Al |
| EN AW-2024 | 0.50 Max | 1.20 -1.80 | 0.30 – 0.90 | 3.80 – 4.90 | 0.50 Max | 0.10 Max | 0.25 Max | 0.15 Max | 0.15 Max | Remainder |
Typical Mechanical Properties
| Temper | Tensile Strength | Yield Strength | Elongation |
|---|---|---|---|
| KSI | KSI | % | |
| O (annealed) | 32 | 14 | 12 |
| T3 | 63 | 42 | 15 |
| Alloy Designation | UK Specifications |
US Specifications |
US Federal Specifications |
European Specifications |
Other |
|---|---|---|---|---|---|
| 2024 A92024 |
BS 2 L97 2024-T351 Plate BS 2 L98 2024-T4 Plate BS L109 2024-T4 Clad sheet BS L110 2024-F Clad sheet British Aerospace S071009 DTD 5100A Clad plate |
AMS 4033 2024-T351 AMS 4034 2024-T351 AMS 4035 2024-T0 sheet , plate AMS 4036 2024-T3/T351 sheet Alclad one side AMS 4037 2024-T3/T351 sheet , plate AMS 4040 2024-T0 Alclad sheet, plate AMS 4041 2024-T3/T351 Alclad sheet, plate AMS 4077 2024-T0 Alclad sheet, plate AMS 4086 2024-T3 Seamless, drawn Hydrualic Tube AMS 4087 2024-T0 Seamless tube AMS 4088 2024-T3 Seamless tube AMS 4112 2024-T6 (see AMS 4339) AMS 4119 2024-T351 (see AMS 4120) AMS 4120 2024-T4/T351 Bar, wire AMS 4152 2024-T3 Extrusions AMS 4164 2024-T3510 Extrusions AMS 4165 2024-T3511 Extrusions AMS 4193 2024-T861 Sheet, plate AMS 4194 2024-T361 1-1.5% Alclad AMS 4195 2024-T861 1.5% Alclad AMS 4270 2024-T3 Alclad sheet AMS 4339 2024-T851 Bar, rod |
QQ-A-200/3 2024-T4 Extruded bar QQ-A-200/3 2024-T8 Extruded bar QQ-A-225/6 2024-T351 Cold finished bar QQ-A-225/6 2024-T4 Cold finished bar QQ-A-225/6 2024-T851 Cold finished bar QQ-A-250/4 2024-0 Sheet and Plate QQ-A-250/4 2024-T3 Sheet and Plate QQ-A-250/5 2024-0 Alclad sheet and plate QQ-A-250/5 2024-T3 Alclad sheet and plate WW-T-700/3 2024-T3 Seamless, drawn tube MIL-T-50777 Seamless Tube MIL-A-81596 Foil |
WS 3.1354 Bare sheet WS 3.1364 Alclad sheet WS 3.1355 EN 2090 2024-T3 Clad sheet EN 2091 Clad sheet EN 2318 2024-T3511 Extruded bar EN 2321 EN 2419 T351 EN 2633 2024-T3511 Extruded bar with peripheral coarse grain control EN 2638 EN 2703 2024-T4 Clad sheet EN 3447 EN 3474 2024-T81 Sheet EN 3550 EN 3997 2024-T3 Sheet EN 3998 2024-T4 Sheet EN 3999 2024-T351 Sheet EN 4001 2024-T351 Clad sheet EN 4101 2024-T4 Sheet EN 6000 |
Airbus ABM1-1005 BAEM 0145 / BAEM 0172 A-U4G1 AIR 9048.630 AIR 9048.100 AIR 9048.110 AIR 9048.120 AIR 9048.130 AIR 9048.140 AIR 9049 AIR 9051A AECMA 2710 ASN-A-3001 ASN-A-3010 ASN-A-3012 ASN-A-3058 ASN-A-3351 ASN-A-3048 CCT VA279 NCT 10-235-03MD NCT 15-235-06MB NCT 15-235-07MB |
Aluminum Alloy Heat Treatment Temper Designations
Basic Aluminum Heat Treatment Designations
- F As Fabricated
- O Annealed
- H Strain Hardened
- W Solution Heat Treated
- T Solution Heat Treated
Heat Treating T Temper Codes
- T1 – Cooled from an elevated temperature shaping process and naturally aged to a substantially stable condition.
- T2 – Cooled from an elevated temperature shaping process, cold worked, and naturally aged to a substantially stable condition.
- T3 – Solution heat treated, cold worked, and naturally aged to a substantially stable condition.
- T4 – Solution heat treated, and naturally aged to a substantially stable condition.
- T5 – Cooled from an elevated temperature shaping process then artificially aged.
- T6 – Solution heat treated then artificially aged.
- T7 – Solution heat treated then overaged/stabilized.
- T8 – Solution heat treated, cold worked, then artificially aged.
- T9 – Solution heat treated, artificially aged, then cold worked.
- T10 – Cooled from an elevated temperature shaping process, cold worked, then artificially aged.
Additional digits may be used after the first T temper digit to indicate subsequent stress relieving by processes such as stretching, compressing, or a combination.
H Temper Strain Hardening Codes
- H1 – Strain hardened only
- H2 – Strain hardened and partially annealed
- H3 – Strain hardened and stabilized
- H4 – Strain hardened and lacquered or painted. This assumes that thermal affects from the coating process affect the strain hardening; seldom encountered.
2024 Packing Information of Aluminum plate :
Application of 2024 Aluminium Sheet
2024 Aluminium Sheet is the most widely used form of Industrial Aluminium. 2024 Aluminium Sheets find applications in various industries such as manufacturing cans and packages, transportation, home appliances, building and construction.
2024 Aluminium Sheet Applications
