5754 Aluminium Sheet
ASTM B209 5754 Aluminium Sheet is one of the most widely used aluminium alloys. Aluminium 5754 Sheet is an alloy of aluminum, further classified within the AA 5000 series (aluminum-magnesium wrought alloy). In European standards, 5754 Aluminium Sheet will typically be given as EN AW-5754. AlMg3 is the EN chemical designation. And A95754 is the UNS number.
Aluminium 5754 Sheet exhibit greater corrosion resistance in both seawater corrosion and industrially polluted atmospheres because of it 5754 Aluminium Sheet is suitable for applications in marine, oil, & gas, chemical and nuclear industry.
5754 Aluminium Sheet Temper 0, H32, H34, H38 as per ASTM B209, ASTM-B-209, EN573, and EN485 international standards. UNS N06002, AMS 5754,
Sasa alloy is the leading manufacturer and exporter of 5754 Aluminium Sheet. Supplier of ASTM B209 5754 Aluminium Sheet from 0.5mm to 5mm Thick 1000mm x 1000mm to 2500mm x 1250mm Tempers manufactured in accordance with international standards ASTM B209, ASTM-B-209, EN573, and EN485, check 5754 Aluminium Sheet price. The general widths of 5754 H16 Aluminum sheets are 1000mm, 1250mm and 1500mm, while common lengths are 2000mm, 2500 mm and 3000mm respectively. Wholesale Trader of 5754 Commercial Aluminium Sheet offered by Sasa alloy , China. Stockist of 5754 Aluminium Sheet, H32 5754 Aluminium Stucco Sheet, H38 Commercial 5754 Aluminium Sheet, ASME SB209 5754 Aluminium Patterned Sheet, 5754 Aluminium Embossed Sheet, 5754 Aluminium Extruded Sheet, 5754 Aluminium Sheet and 5754 Aluminium Sheet in China. Cut to Size 5754 Aluminium Sheet Available
Standard Dimensions of 5754 Aluminium Sheet
Standard dimensions (a x b) of Aluminium 5754 Sheet
Aluminium 5754 Sheet up to 9.9 mm
2.000 x 1.000 mm
2.500 x 1.250 mm
3.000 x 1.500 mm
Oversize Aluminium 5754 Sheet
4.000 x 2.000 mm
6.000 x 2.500 mm
8.000 x 2.500 mm
Other dimensions on request
Alloy | ASTM B209 1050, 1060, 1100, 1235, 3003, 3004, 3105, 5052, 5754, 6061, 8011 |
Aluminium 5754 Sheet Temper | O, H12, H14, H16, H18, H22, H24, H26, H32, H112 |
Aluminium 5754 Sheet Thickness | 0.5mm-150mm |
Aluminium 5754 Sheet Width | 500-2000mm |
Aluminium 5754 Sheet Length | to clients’ requirement |
Aluminium 5754 Sheet Coating | Polyester, Fluorocarbon, polyurethane and epoxy coating |
5754 Aluminium Sheet Coating finish | PVDF, POLYESTER(PE) |
Surface | Bright, polished, hair line, brush, sand blast, checkered, embossed, etching, etc. |
Gloss | Meet the customer requirement |
Total coating thickness | PVDF coating: More than 25 micron; Polyester coating: More than 18 micron |
Coating hardness | (pencil hardness) more than 2H |
Coating adhesive | No lower than1st grade |
Impact resistance | No cracking or peeling (50kg/cm, ASTMD-2794: 1993) |
Flexibility (T-bend) | 2T |
MEK resistance | More than 10 |
Available Aluminium 5754 Sheet Stock Sizes | 1ft x 1ft, 1ft x 2ft, 1ft x 4ft, 2ft x 2ft, 2ft x 4ft, 4ft x 4ft, 4ft x 8ft, 4ft x 10ft or Cut to Size or Custom Shape. |
Aluminium 5754 Sheet Delivery Time | 30-60 days after receiving the prepayment |
Aluminium 5754 Sheet Packaging Details | Standard export package. One pallet is about 2-3 ton.Two steel belts in width and three in width. One 20GP container can load about 18-20 tons Aluminium 5754 Sheet. One 40GP container can load about 24 tons Aluminium 5754 Sheet |
ASTM B209 Alloy 5754 Outer packing | Export standard, wooden pallet |
Bottom side Aluminium 5754 Sheet is coated with protective polyester material, thickness more than 6 micron | |
Export to | Singapore, Indonesia, Ukraine, Korea, Thailand, Vietnam, Saudi Arabia, Brazil, Spain, Canada, USA, Egypt, Iran, China, Kuwait, Dubai, Oman, Kuwait, Peru, Mexico, Iraq, Russia, Malaysia, etc. |
5754 Aluminium Sheet Products Show:
5754 Aluminium Sheets Product Range | ||||
---|---|---|---|---|
Alloy No. | Thickness (mm) |
Width (mm) |
Length (mm) |
Temper |
A1050, A1060, A1070, A1100 | 0.2-5.0 | 20-2200 | 20-8000 | O, H12, H22, H14, H16, H18, H24, H26 |
A3003, A3105, A3004 | 0.2-5.0 | 20-2200 | 20-8000 | O, H14, H18, H24 |
A5052, A5005, A5083, A5086, A5754 | 0.2-5.0 | 20-2200 | 20-8000 | O, H18, H24, H32, H34, H111, H112 |
A6061, A6082, A6063 | 0.2-5.0 | 20-2200 | 20-8000 | T4, T6, T651 |
A8011 | 0.2-5.0 | 20-2200 | 20-8000 | O, H12, H22, H14, H16, H18, H24, H26 |
Aluminium 5754 Sheets Manufacturer in China:
1100-H14 Aluminum Sheet: ASTM-B-209
2024-T3 ALCLAD Aluminum Sheet: AMS-QQ-A-205/5, ASTM-B-209, AMS-4041
2024-T3 BARE Aluminum Sheet: AMS-QQ-A-205/5, ASTM-B-209, AMS-4037
2219-T6 Aluminum Sheet:
2219-O Aluminum Sheet: AMS-QQ-A-250/30
3003-H14 Aluminum Sheet: ASTM-B-209
3003-O Aluminum Sheet: ASTM-B-209
4047-F Aluminum Sheet: AMS-4185, BAlSi-4
5052-H32 Aluminum Sheet: ASTM-B-209, AMS-4016
5052-H38 Aluminum Sheet: ASTM-B-209
5052-O Aluminum Sheet: ASTM-B-209, AMS-4015
6061-O Aluminum Sheet: ASTM-B-209, AMS-4025
6061-T4 Aluminum Sheet: ASTM-B-209, AMS-4026
6061-T6 Aluminum Sheet: ASTM-B-209, AMS 4027
7075-T6 Aluminum Sheet: AMS-QQ-A-250/12, AMS-4045
7075-O ALCLAD Aluminum Sheet: ASTM-B-209
7075-O BARE Aluminum Sheet: AMS-QQ-A-250/12, AMS-4045
Aluminum Specular Lighting Sheet
ALLOYS | SPECIFICATIONS |
---|---|
1100 | AMS-4001, 4003, QQ-A-250/1 |
2014-BARE | AMS-4028, 4029 |
2014-ALCLAD | QQ-A-250/3 |
2024-BARE | AMS-4035,37, QQ-A-250/4 |
2024-ALCLAD | AMS-4040, 41, QQ-A-250/5 |
2124 | AMS-4101, QQ-A-250/29 |
2219 | AMS-4031, 94, 95, QQ-A-250/30 |
3003 | AMS-4006, 4008, QQ-A-250/2 |
5052 | AMS-4015, 16, 17, QQ-A-250/8 |
6013 | AMS-4347, 4216 |
6061 | AMS-4025, 26, 27, QQ-A-250/11 |
7050 | AMS-4050, 4201, BMS-7-194 |
7075-BARE | AMS-4044, 45, QQ-A-250/12 |
7075-ALCLAD | AMS-4048, 49, QQ-A-250/13 |
7178-BARE | QQ-A-250/14 |
7178-ALCLAD | QQ-A-250/15 |
7475 | AMS-4084, 4085 |
Sizes: | .008 to .249 x R/W x R/L .250 to 18.00 x R/W x R/L |
Please note: Other alloys available upon request
* Special Tolerances Available
* Polishing & PVC Protected
Standard Specification of 5754 Aluminium Sheet
Standards and specifications by country
Specification | Alloy | Temper | Company |
---|---|---|---|
Europe | |||
EN 2089/2395 | 2014A | T6(T62)/T4(T42) | |
EN 2087/2088 | 2014A clad | T6(T62)/T4(T42) | |
EN 4101 | 2024 | T4 | |
EN 2090/2091/2703/4001 | 2024 clad cmq | T3/T4/T4(T42)/T351 | |
EN 3474/3997/3998/3999 | 2024 cmq | T81/T3/T4(T42)/T351 | |
EN 2694/EN 3341 | 6061 | T6(T62)/T4(T42) | |
EN 4449/4450 | 7050 | T76/F(T762) | |
EN 2696 | 7075 | T6(T62) | |
EN 2092 | 7075 clad | T6(T62) | |
EN 2802/3333 | 7475 | T761/F(T762) | |
EN 2803/3332 | 7475 clad | T761/F(T762) | |
France | |||
AIR 9048.010/.030/ | 2014 | F(T42)/F(T62)/T4/ | |
.020/.040/.050 | 2014 | T6/T451 | |
AIR 9048.060/.080/.070/.090 | 2014 clad | F(T42)/F(T62)/T4/T6 | |
AIR 9048.100/.110/.120 | 2024 | ||
AIR 9048.130/.140 | 2024 clad | F(T42)/T3 | |
AIR 9048.150 | 2618A | H28(T62) | |
AIR 9048.170 | 2618A clad | H28(T62) | |
AIR 9048.190/.200 | 5086 | O, H111/H22, H32 | |
AIR 9048.210/.220/.230/.240 | 6061 | O, H111(T42)/T4/ O, H111(T62)/T6 | |
AIR 9048.260/.270 | 7075 | T6/T76 | |
AIR 9048.280 | 7075 clad | T6 | |
AIR 9048.290 | 7475 | T76 | Boeing |
Germany | |||
W.-Nr. 3.1254 | 2014A | T4, T6 | |
W.-Nr. 3.1354 | 2024 | O(T42), T3 | |
W.-Nr. 3.1364 | 2024 clad | O(T42), T3 | |
W.-Nr. 3.3214 | 6061 | O(T62), T6 | |
W.-Nr. 3.4364 | 7075 | T6 | |
W.-Nr. 3.4374 | 7075 clad | O(T62), T6 | |
W.-Nr. 3.4377 | 7475 clad | T76 | |
UK | |||
BS L16/17 | 1200 | H4/O | |
BS L156/157/158*/159* | 2014A | ||
158*/159* | 2014A clad | (T42)(T62) | BAE Systems |
BS L163/164/165 | 2014A clad | T3/F(T42), T4/T6 | |
BS L166*/167* | 2014A clad | F(T42), T4/T6 | |
BS L109/110 | 2024 clad | T3/F(T42) | |
DTD5070 | 2618A clad | T6 | |
BS L59/60/61 | 3103 | H6/H2/O | |
BS L80/81 | 5251 | O/H6 | |
BS L113 | 6082 | T4, T6 | |
BS L88 | 7075 clad | T6 | |
USA | |||
AMS QQ-A-250/3 | 2014 clad | O, T4, T6 | |
AMS QQ-A-250/4 | 2024 | O, T3 | |
AMS 4037 | 2024 | T3 | |
AMS QQ-A-250/5 | 2024 clad | O, T3 | |
AMS 4041 | 2024 clad | T3 | |
AMS QQ-A-250/30 | 2219 | O(T62), T31(T81), T37(T87) | |
AMS QQ-A-250/2 | 3003 | O, H14 | |
AMS 4347 | 6013 | T4 | |
AMS 4216 | 6013 | T6 | |
AMS 4025/4026/4027 | 6061 | O, F, T4, T42, T45, T6, T62, T651 | |
AMS QQ-A-250/12 | 7075 | O, T6, T73 | |
AMS QQ-A-250/24 | 7075 | T76 | |
AMS QQ-A-250/13 | 7075 clad | O, T6, T73 | |
AMS QQ-A-250/26 | 7075 clad with 7011 | T76 | |
AMS QQ-A-250/25 | 7075 clad with 7072 | T76 |
European Standard | BS (OLD) | USA (AA) | GERMANY (DIN) | ISO | IS | Canadian |
---|---|---|---|---|---|---|
EN AW-1050 A | 1E | 1050 | Al99.5 | Al99.5 | 19500, 19501 | 1 S |
EN AW-1070 A | – | 1070 | Al-99.7 | Al-99.7 | 19700 | – |
EN AW-1100 | IC | 1100 | Al-99.0 | Al-99.0 | 19000 | 2 S |
EN AW-2011 | FC1 | 2011 | AlCuBiPb | AlCu6BiPb | – | 28S |
EN AW-2014 | HE15 | 2014 | AlCuSiMn | AlCu4SiMg | 24345 | B26S |
EN AW-2024 | – | 2024 | AlCuMg2 | AlCu4Mg1 | – | 24 S |
EN AW-3003 | N3 | 3003 | AlMnCu | AlMn1Cu | 31000 | 3 S |
EN AW-3103 | – | 3103 | – | AlMn1 | – | – |
EN AW-6101A | E91E | 6101 | E AlMgSi 0.5 | E AlMgSi(A) | 63401 | D50S |
EN AW-6005 | – | 6005 | AlMgSi0.7 | AlSiMg | 62400 | C51S |
EN AW-6351 | HE30 | 6351 | AlMgSi1 | AlSiMg0.5Mn | 64430 | B51S |
EN AW-6060 | – | 6060 | AlMgSi 0.5 | AlMgSi | – | – |
EN AW-6061 | HE20 | 6061 | AlMgSiCu | AlMg1SiCu | 65032 | 65S |
EN AW-6063 | HE9 | 6063 | AlMgSi0.5 | AlMg0.7Si | 63400 | 50S |
EN AW-6082 | HE30 | 6351 | AlMgSi1 | AlSi1MgMn | 64430 | B51S |
5754 Aluminium Sheet Sizes
Sizes (mm) | Theoretical Mass KG/sheet |
---|---|
2000 X 1000 X 0.5 | 2500 X 1250 X 0.5 |
2000 X 1000 X 0.7 | 2500 X 1250 X 0.7 |
2000 X 1000 X 0.9 | 2500 X 1250 X 0.9 |
2000 X 1000 X 1.2 | 2500 X 1250 X 1.2 |
3000 X 1500 X 1.2 | 2000 X 1000 X 1.6 |
2500 X 1250 X 1.6 | 3000 X 1500 X 1.6 |
2000 X 1000 X 2.0 | 2500 X 1250 X 2.0 |
3000 X 1500 X 2.0 | 2500 X 1250 X 2.5 |
2.79 | 4.36 |
3.91 | 6.10 |
5.02 | 7.85 |
6.74 | 10.46 |
15.01 | 8.93 |
13.95 | 20.09 |
11.16 | 17.44 |
25.11 | 21.80 |
5754 Aluminium Sheet Weight Chart
Width: 1.000 mm | Length: 2.000 mm
Product | Thickness | Weight |
---|---|---|
5754 Aluminium Sheet | 0,30 mm | 0,810 Kg/m2 |
5754 Aluminium Sheet | 0,40 mm | 1,080 Kg/m2 |
5754 Aluminium Sheet | 0,50 mm | 1,350 Kg/m2 |
5754 Aluminium Sheet | 0,60 mm | 1,620 Kg/m2 |
5754 Aluminium Sheet | 0,70 mm | 1,890 Kg/m2 |
5754 Aluminium Sheet | 0,80 mm | 2,160 Kg/m2 |
5754 Aluminium Sheet | 0,90 mm | 2,430 Kg/m2 |
5754 Aluminium Sheet | 1,00 mm | 2,700 Kg/m2 |
5754 Aluminium Sheet | 1,20 mm | 3,240 Kg/m2 |
5754 Aluminium Sheet | 1,40 mm | 3,780 Kg/m2 |
5754 Aluminium Sheet | 1,50 mm | 4,050 Kg/m2 |
5754 Aluminium Sheet | 1,60 mm | 4,320 Kg/m2 |
5754 Aluminium Sheet | 1,80 mm | 4,860 Kg/m2 |
5754 Aluminium Sheet | 2,00 mm | 5,400 Kg/m2 |
5754 Aluminium Sheet | 2,20 mm | 5,940 Kg/m2 |
5754 Aluminium Sheet | 2,50 mm | 6,750 Kg/m2 |
5754 Aluminium Sheet | 3,00 mm | 8,100 Kg/m2 |
5754 Aluminium Sheet | 4,00 mm | 10,800 Kg/m2 |
5754 Aluminium Sheet | 5,00 mm | 13,500 Kg/m2 |
5754 Aluminium Sheet | 6,00 mm | 16,200 Kg/m2 |
5754 Aluminium Sheet | 10,00 mm | 27,000 Kg/m2 |
5754 Aluminium Sheet | 12,00 mm | 32,400 Kg/m2 |
5754 Aluminium Sheet | 15,00 mm | 40,500 Kg/m2 |
5754 Aluminium Sheet | 20,00 mm | 54,000 Kg/m2 |
5754 Aluminium Sheet Chemical Composition
Spec: BS EN 573-3:2009
Alloy 5754
Chemical Element | % Present |
---|---|
Manganese (Mn) | 0.0 – 0.50 |
Iron (Fe) | 0.0 – 0.40 |
Magnesium (Mg) | 2.60 – 3.60 |
Silicon (Si) | 0.0 – 0.40 |
Chromium (Cr) | 0.0 – 0.30 |
Copper (Cu) | 0.0 – 0.10 |
Manganese + Chromium (Mn+Cr) | 0.10 – 0.60 |
Other (Each) | 0.0 – 0.05 |
Others (Total) | 0.0 – 0.15 |
Titanium (Ti) | 0.0 – 0.15 |
Zinc (Zn) | 0.0 – 0.20 |
Aluminium (Al) | Balance |
Aluminium 5754 Sheet Mechanical Properties
Spec: BS EN 485-2:2008
Sheet & Plate – 0.2mm to 40mm
Mechanical Property | Value |
---|---|
Proof Stress | 130 Min MPa |
Tensile Strength | 220 – 270 MPa |
Hardness Brinell | 63 HB |
Elongation A50 mm | 7 Min % |
Aluminum Alloy Heat Treatment Temper Designations
Basic Aluminum Heat Treatment Designations
- F As Fabricated
- O Annealed
- H Strain Hardened
- W Solution Heat Treated
- T Solution Heat Treated
Heat Treating T Temper Codes
- T1 – Cooled from an elevated temperature shaping process and naturally aged to a substantially stable condition.
- T2 – Cooled from an elevated temperature shaping process, cold worked, and naturally aged to a substantially stable condition.
- T3 – Solution heat treated, cold worked, and naturally aged to a substantially stable condition.
- T4 – Solution heat treated, and naturally aged to a substantially stable condition.
- T5 – Cooled from an elevated temperature shaping process then artificially aged.
- T6 – Solution heat treated then artificially aged.
- T7 – Solution heat treated then overaged/stabilized.
- T8 – Solution heat treated, cold worked, then artificially aged.
- T9 – Solution heat treated, artificially aged, then cold worked.
- T10 – Cooled from an elevated temperature shaping process, cold worked, then artificially aged.
Additional digits may be used after the first T temper digit to indicate subsequent stress relieving by processes such as stretching, compressing, or a combination.
H Temper Strain Hardening Codes
- H1 – Strain hardened only
- H2 – Strain hardened and partially annealed
- H3 – Strain hardened and stabilized
- H4 – Strain hardened and lacquered or painted. This assumes that thermal affects from the coating process affect the strain hardening; seldom encountered.
5754 Packing Information of Aluminum plate :
Application of 5754 Aluminium Sheet
Sasa alloy 5754 Aluminium Sheet is the most widely used form of Industrial Aluminium. 5754 Aluminium Sheets find applications in various industries such as manufacturing cans and packages, transportation, home appliances, building and construction.