6061 Aluminium Sheet
Aluminium 6061 Sheet is a precipitation-hardened aluminium alloy, containing magnesium and silicon as its major alloying elements. Originally called “Alloy 61S”, it was developed in 1935.
6061 Aluminium Sheet is a medium to high strength heat-treatable alloy with a strength higher than 6005A. ASTM B209 6061 Aluminium Sheet has very good corrosion resistance and very good weldability although reduced strength in the weld zone. It has medium fatigue strength. It has good cold formability in the temper T4, but limited formability in T6 temper. Not suitable for very complex cross sections.
6061 Aluminium Sheet Temper 0, H32, H34, H38 as per ASTM B209, ASTM-B-209, EN573, and EN485 international standards. Aluminum Alloy 6061 O, T1, T4, T42, T4510, T4511, T51, T6, T62, T6510, or T6511. Back, UNS Number – UNS A96061, Specification – AMS-QQ-A-200/8
6061-O Aluminum Sheet: ASTM-B-209, AMS-4025
6061-T4 Aluminum Sheet: ASTM-B-209, AMS-4026
6061-T6 Aluminum Sheet: ASTM-B-209, AMS 4027
Sasa alloy is the leading manufacturer and exporter of 6061 Aluminium Sheet. Supplier of ASTM B209 6061 Aluminium Sheet from 0.5mm to 5mm Thick 1000mm x 1000mm to 2500mm x 1250mm Tempers manufactured in accordance with international standards ASTM B209, ASTM-B-209, EN573, and EN485, check 6061 Aluminium Sheet price. The general widths of 6061 H16 Aluminum sheets are 1000mm, 1250mm and 1500mm, while common lengths are 2000mm, 2500 mm and 3000mm respectively. Wholesale Trader of 6061 Commercial Aluminium Sheet offered by Sasa alloy , China. Stockist of 6061 Aluminium Sheet, H32 6061 Aluminium Stucco Sheet, H38 Commercial 6061 Aluminium Sheet, ASME SB209 6061 Aluminium Patterned Sheet, 6061 Aluminium Embossed Sheet, 6061 Aluminium Extruded Sheet, 6061 Aluminium Sheet and 6061 Aluminium Sheet in China.
Standard Dimensions of 6061 Aluminium Sheet
Standard dimensions (a x b) of Aluminium 6061 Sheet
Aluminium 6061 Sheet up to 9.9 mm
2.000 x 1.000 mm
2.500 x 1.250 mm
3.000 x 1.500 mm
Oversize Aluminium 6061 Sheet
4.000 x 2.000 mm
6.000 x 2.500 mm
8.000 x 2.500 mm
Other dimensions on request
| Alloy | ASTM B209 1050, 1060, 1100, 1235, 3003, 3004, 3105, 5052, 5754, 6061, 8011 |
| Aluminium 6061 Sheet Temper | O, H12, H14, H16, H18, H22, H24, H26, H32, H112 |
| Aluminium 6061 Sheet Thickness | 0.5mm-150mm |
| Aluminium 6061 Sheet Width | 500-2000mm |
| Aluminium 6061 Sheet Length | to clients’ requirement |
| Aluminium 6061 Sheet Coating | Polyester, Fluorocarbon, polyurethane and epoxy coating |
| 6061 Aluminium Sheet Coating finish | PVDF, POLYESTER(PE) |
| Surface | Bright, polished, hair line, brush, sand blast, checkered, embossed, etching, etc. |
| Gloss | Meet the customer requirement |
| Total coating thickness | PVDF coating: More than 25 micron; Polyester coating: More than 18 micron |
| Coating hardness | (pencil hardness) more than 2H |
| Coating adhesive | No lower than1st grade |
| Impact resistance | No cracking or peeling (50kg/cm, ASTMD-2794: 1993) |
| Flexibility (T-bend) | 2T |
| MEK resistance | More than 10 |
| Available Aluminium 6061 Sheet Stock Sizes | 1ft x 1ft, 1ft x 2ft, 1ft x 4ft, 2ft x 2ft, 2ft x 4ft, 4ft x 4ft, 4ft x 8ft, 4ft x 10ft or Cut to Size or Custom Shape. |
| Aluminium 6061 Sheet Delivery Time | 30-60 days after receiving the prepayment |
| Aluminium 6061 Sheet Packaging Details | Standard export package. One pallet is about 2-3 ton.Two steel belts in width and three in width. One 20GP container can load about 18-20 tons Aluminium 6061 Sheet. One 40GP container can load about 24 tons Aluminium 6061 Sheet |
| ASTM B209 Alloy 6061 Outer packing | Export standard, wooden pallet |
| Bottom side Aluminium 6061 Sheet is coated with protective polyester material, thickness more than 6 micron | |
| Export to | Singapore, Indonesia, Ukraine, Korea, Thailand, Vietnam, Saudi Arabia, Brazil, Spain, Canada, USA, Egypt, Iran, China, Kuwait, Dubai, Oman, Kuwait, Peru, Mexico, Iraq, Russia, Malaysia, etc. |
6061 Aluminium Sheet Products Show:
| 6061 Aluminium Sheets Product Range | ||||
|---|---|---|---|---|
| Alloy No. | Thickness (mm) |
Width (mm) |
Length (mm) |
Temper |
| A1050, A1060, A1070, A1100 | 0.2-5.0 | 20-2200 | 20-8000 | O, H12, H22, H14, H16, H18, H24, H26 |
| A3003, A3105, A3004 | 0.2-5.0 | 20-2200 | 20-8000 | O, H14, H18, H24 |
| A5052, A5005, A5083, A5086, A5754 | 0.2-5.0 | 20-2200 | 20-8000 | O, H18, H24, H32, H34, H111, H112 |
| A6061, A6082, A6063 | 0.2-5.0 | 20-2200 | 20-8000 | T4, T6, T651 |
| A8011 | 0.2-5.0 | 20-2200 | 20-8000 | O, H12, H22, H14, H16, H18, H24, H26 |
Aluminium 6061 Sheets Manufacturer in China:
1100-H14 Aluminum Sheet: ASTM-B-209
2024-T3 ALCLAD Aluminum Sheet: AMS-QQ-A-205/5, ASTM-B-209, AMS-4041
2024-T3 BARE Aluminum Sheet: AMS-QQ-A-205/5, ASTM-B-209, AMS-4037
2219-T6 Aluminum Sheet:
2219-O Aluminum Sheet: AMS-QQ-A-250/30
3003-H14 Aluminum Sheet: ASTM-B-209
3003-O Aluminum Sheet: ASTM-B-209
4047-F Aluminum Sheet: AMS-4185, BAlSi-4
5052-H32 Aluminum Sheet: ASTM-B-209, AMS-4016
5052-H38 Aluminum Sheet: ASTM-B-209
5052-O Aluminum Sheet: ASTM-B-209, AMS-4015
6061-O Aluminum Sheet: ASTM-B-209, AMS-4025
6061-T4 Aluminum Sheet: ASTM-B-209, AMS-4026
6061-T6 Aluminum Sheet: ASTM-B-209, AMS 4027
7075-T6 Aluminum Sheet: AMS-QQ-A-250/12, AMS-4045
7075-O ALCLAD Aluminum Sheet: ASTM-B-209
7075-O BARE Aluminum Sheet: AMS-QQ-A-250/12, AMS-4045
Aluminum Specular Lighting Sheet
| ALLOYS | SPECIFICATIONS |
|---|---|
| 1100 | AMS-4001, 4003, QQ-A-250/1 |
| 2014-BARE | AMS-4028, 4029 |
| 2014-ALCLAD | QQ-A-250/3 |
| 2024-BARE | AMS-4035,37, QQ-A-250/4 |
| 2024-ALCLAD | AMS-4040, 41, QQ-A-250/5 |
| 2124 | AMS-4101, QQ-A-250/29 |
| 2219 | AMS-4031, 94, 95, QQ-A-250/30 |
| 3003 | AMS-4006, 4008, QQ-A-250/2 |
| 5052 | AMS-4015, 16, 17, QQ-A-250/8 |
| 6013 | AMS-4347, 4216 |
| 6061 | AMS-4025, 26, 27, QQ-A-250/11 |
| 7050 | AMS-4050, 4201, BMS-7-194 |
| 7075-BARE | AMS-4044, 45, QQ-A-250/12 |
| 7075-ALCLAD | AMS-4048, 49, QQ-A-250/13 |
| 7178-BARE | QQ-A-250/14 |
| 7178-ALCLAD | QQ-A-250/15 |
| 7475 | AMS-4084, 4085 |
| Sizes: | .008 to .249 x R/W x R/L .250 to 18.00 x R/W x R/L |
Please note: Other alloys available upon request
* Special Tolerances Available
* Polishing & PVC Protected
Standard Specification of 6061 Aluminium Sheet
Standards and specifications by country
| Specification | Alloy | Temper | Company |
|---|---|---|---|
| Europe | |||
| EN 2089/2395 | 2014A | T6(T62)/T4(T42) | |
| EN 2087/2088 | 2014A clad | T6(T62)/T4(T42) | |
| EN 4101 | 2024 | T4 | |
| EN 2090/2091/2703/4001 | 2024 clad cmq | T3/T4/T4(T42)/T351 | |
| EN 3474/3997/3998/3999 | 2024 cmq | T81/T3/T4(T42)/T351 | |
| EN 2694/EN 3341 | 6061 | T6(T62)/T4(T42) | |
| EN 4449/4450 | 7050 | T76/F(T762) | |
| EN 2696 | 7075 | T6(T62) | |
| EN 2092 | 7075 clad | T6(T62) | |
| EN 2802/3333 | 7475 | T761/F(T762) | |
| EN 2803/3332 | 7475 clad | T761/F(T762) | |
| France | |||
| AIR 9048.010/.030/ | 2014 | F(T42)/F(T62)/T4/ | |
| .020/.040/.050 | 2014 | T6/T451 | |
| AIR 9048.060/.080/.070/.090 | 2014 clad | F(T42)/F(T62)/T4/T6 | |
| AIR 9048.100/.110/.120 | 2024 | ||
| AIR 9048.130/.140 | 2024 clad | F(T42)/T3 | |
| AIR 9048.150 | 2618A | H28(T62) | |
| AIR 9048.170 | 2618A clad | H28(T62) | |
| AIR 9048.190/.200 | 5086 | O, H111/H22, H32 | |
| AIR 9048.210/.220/.230/.240 | 6061 | O, H111(T42)/T4/ O, H111(T62)/T6 | |
| AIR 9048.260/.270 | 7075 | T6/T76 | |
| AIR 9048.280 | 7075 clad | T6 | |
| AIR 9048.290 | 7475 | T76 | Boeing |
| Germany | |||
| W.-Nr. 3.1254 | 2014A | T4, T6 | |
| W.-Nr. 3.1354 | 2024 | O(T42), T3 | |
| W.-Nr. 3.1364 | 2024 clad | O(T42), T3 | |
| W.-Nr. 3.3214 | 6061 | O(T62), T6 | |
| W.-Nr. 3.4364 | 7075 | T6 | |
| W.-Nr. 3.4374 | 7075 clad | O(T62), T6 | |
| W.-Nr. 3.4377 | 7475 clad | T76 | |
| UK | |||
| BS L16/17 | 1200 | H4/O | |
| BS L156/157/158*/159* | 2014A | ||
| 158*/159* | 2014A clad | (T42)(T62) | BAE Systems |
| BS L163/164/165 | 2014A clad | T3/F(T42), T4/T6 | |
| BS L166*/167* | 2014A clad | F(T42), T4/T6 | |
| BS L109/110 | 2024 clad | T3/F(T42) | |
| DTD5070 | 2618A clad | T6 | |
| BS L59/60/61 | 3103 | H6/H2/O | |
| BS L80/81 | 5251 | O/H6 | |
| BS L113 | 6082 | T4, T6 | |
| BS L88 | 7075 clad | T6 | |
| USA | |||
| AMS QQ-A-250/3 | 2014 clad | O, T4, T6 | |
| AMS QQ-A-250/4 | 2024 | O, T3 | |
| AMS 4037 | 2024 | T3 | |
| AMS QQ-A-250/5 | 2024 clad | O, T3 | |
| AMS 4041 | 2024 clad | T3 | |
| AMS QQ-A-250/30 | 2219 | O(T62), T31(T81), T37(T87) | |
| AMS QQ-A-250/2 | 3003 | O, H14 | |
| AMS 4347 | 6013 | T4 | |
| AMS 4216 | 6013 | T6 | |
| AMS 4025/4026/4027 | 6061 | O, F, T4, T42, T45, T6, T62, T651 | |
| AMS QQ-A-250/12 | 7075 | O, T6, T73 | |
| AMS QQ-A-250/24 | 7075 | T76 | |
| AMS QQ-A-250/13 | 7075 clad | O, T6, T73 | |
| AMS QQ-A-250/26 | 7075 clad with 7011 | T76 | |
| AMS QQ-A-250/25 | 7075 clad with 7072 | T76 | |
| European Standard | BS (OLD) | USA (AA) | GERMANY (DIN) | ISO | IS | Canadian |
|---|---|---|---|---|---|---|
| EN AW-1050 A | 1E | 1050 | Al99.5 | Al99.5 | 19500, 19501 | 1 S |
| EN AW-1070 A | – | 1070 | Al-99.7 | Al-99.7 | 19700 | – |
| EN AW-1100 | IC | 1100 | Al-99.0 | Al-99.0 | 19000 | 2 S |
| EN AW-2011 | FC1 | 2011 | AlCuBiPb | AlCu6BiPb | – | 28S |
| EN AW-2014 | HE15 | 2014 | AlCuSiMn | AlCu4SiMg | 24345 | B26S |
| EN AW-2024 | – | 2024 | AlCuMg2 | AlCu4Mg1 | – | 24 S |
| EN AW-3003 | N3 | 3003 | AlMnCu | AlMn1Cu | 31000 | 3 S |
| EN AW-3103 | – | 3103 | – | AlMn1 | – | – |
| EN AW-6101A | E91E | 6101 | E AlMgSi 0.5 | E AlMgSi(A) | 63401 | D50S |
| EN AW-6005 | – | 6005 | AlMgSi0.7 | AlSiMg | 62400 | C51S |
| EN AW-6351 | HE30 | 6351 | AlMgSi1 | AlSiMg0.5Mn | 64430 | B51S |
| EN AW-6060 | – | 6060 | AlMgSi 0.5 | AlMgSi | – | – |
| EN AW-6061 | HE20 | 6061 | AlMgSiCu | AlMg1SiCu | 65032 | 65S |
| EN AW-6063 | HE9 | 6063 | AlMgSi0.5 | AlMg0.7Si | 63400 | 50S |
| EN AW-6082 | HE30 | 6351 | AlMgSi1 | AlSi1MgMn | 64430 | B51S |
6061 Aluminium Sheet Sizes
| Sizes (mm) | Theoretical Mass KG/sheet |
|---|---|
| 2000 X 1000 X 0.5 | 2500 X 1250 X 0.5 |
| 2000 X 1000 X 0.7 | 2500 X 1250 X 0.7 |
| 2000 X 1000 X 0.9 | 2500 X 1250 X 0.9 |
| 2000 X 1000 X 1.2 | 2500 X 1250 X 1.2 |
| 3000 X 1500 X 1.2 | 2000 X 1000 X 1.6 |
| 2500 X 1250 X 1.6 | 3000 X 1500 X 1.6 |
| 2000 X 1000 X 2.0 | 2500 X 1250 X 2.0 |
| 3000 X 1500 X 2.0 | 2500 X 1250 X 2.5 |
| 2.79 | 4.36 |
| 3.91 | 6.10 |
| 5.02 | 7.85 |
| 6.74 | 10.46 |
| 15.01 | 8.93 |
| 13.95 | 20.09 |
| 11.16 | 17.44 |
| 25.11 | 21.80 |
6061 Aluminium Sheet Weight Chart
Width: 1.000 mm | Length: 2.000 mm
| Product | Thickness | Weight |
|---|---|---|
| 6061 Aluminium Sheet | 0,30 mm | 0,810 Kg/m2 |
| 6061 Aluminium Sheet | 0,40 mm | 1,080 Kg/m2 |
| 6061 Aluminium Sheet | 0,50 mm | 1,350 Kg/m2 |
| 6061 Aluminium Sheet | 0,60 mm | 1,620 Kg/m2 |
| 6061 Aluminium Sheet | 0,70 mm | 1,890 Kg/m2 |
| 6061 Aluminium Sheet | 0,80 mm | 2,160 Kg/m2 |
| 6061 Aluminium Sheet | 0,90 mm | 2,430 Kg/m2 |
| 6061 Aluminium Sheet | 1,00 mm | 2,700 Kg/m2 |
| 6061 Aluminium Sheet | 1,20 mm | 3,240 Kg/m2 |
| 6061 Aluminium Sheet | 1,40 mm | 3,780 Kg/m2 |
| 6061 Aluminium Sheet | 1,50 mm | 4,050 Kg/m2 |
| 6061 Aluminium Sheet | 1,60 mm | 4,320 Kg/m2 |
| 6061 Aluminium Sheet | 1,80 mm | 4,860 Kg/m2 |
| 6061 Aluminium Sheet | 2,00 mm | 5,400 Kg/m2 |
| 6061 Aluminium Sheet | 2,20 mm | 5,940 Kg/m2 |
| 6061 Aluminium Sheet | 2,50 mm | 6,750 Kg/m2 |
| 6061 Aluminium Sheet | 3,00 mm | 8,100 Kg/m2 |
| 6061 Aluminium Sheet | 4,00 mm | 10,800 Kg/m2 |
| 6061 Aluminium Sheet | 5,00 mm | 13,500 Kg/m2 |
| 6061 Aluminium Sheet | 6,00 mm | 16,200 Kg/m2 |
| 6061 Aluminium Sheet | 10,00 mm | 27,000 Kg/m2 |
| 6061 Aluminium Sheet | 12,00 mm | 32,400 Kg/m2 |
| 6061 Aluminium Sheet | 15,00 mm | 40,500 Kg/m2 |
| 6061 Aluminium Sheet | 20,00 mm | 54,000 Kg/m2 |
6061 Aluminium Sheet Chemical Composition
| Alloy (ISS) | Equivalent alloy (A.A) | Copper | Magnesium | Silicon | Iron | Managanese Others* (Total) | Remarks | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Old | New | U.S.A | Min. | Max. | Min. | Max. | Min. | Max. | Min. | Max. | Max | Max. | Aluminum 99.0% Min. | ||
| H 20 | 65032 | 6061 | 0.15 | 0.4 | 0.7 | 1.2 | 0.4 | 0.8 | 0.7 | 0.2 | 0.8 | 0.4 | Chromium up to 0.10 | ||
Aluminium 6061 Sheet Mechanical Properties
| Alloy | Temper | UTS (Mpa) | Yield Strength (Mpa) | Elongation (%) | ||
|---|---|---|---|---|---|---|
| Minimum | Maximum | Minimum | Maximum | A 50mm (Minimum) | ||
| EN AW-6061 | O | – | 150 | – | 110 | 14 |
| T4 | 180 | – | 110 | – | 13 | |
| T6 | 260 | – | 240 | – | 6 | |
| Alloy Designation | UK Specifications |
US Specifications |
US Federal Specifications |
European Specifications |
Other |
|---|---|---|---|---|---|
| 6061 A96061 A86061 |
BS L117 Alloy 6061 Tube Drawn T6 BS L118 Alloy 6061 Tube Drawn T6 Hydraulically Tested H20 HE20 6061 Extrusions HP20 6061 Plate HS20 6061 Sheet |
AMS 4009 6061-0 Foil AMS 4021 6061-0 Alclad Sheet and Plate AMS 4022 6061 Alclad Sheet and Plate Cancelled AMS 4023 6061 Alclad Sheet and Plate Cancelled AMS 4025 6061-0 Sheet and Plate AMS 4026 6061-T4 Sheet T451 Plate AMS 4027 6061-T6 Sheet and T651 Plate AMS 4053 6061 Cancelled AMS 4079 6061-0 Tube Drawn Seamless Close Tolerence AMS 4080 6061-0 Tube Drawn Seamless AMS 4081 6081-T4 Tube Drawn Seamless Hydraulic AMS 4082 6061-T6 Tube Drawn Seamless AMS 4083 6061-T6 Tube Drawn Seamless Hydraulic AMS 4091 Superseded by AMS 4081 AMS 4092 Superseded by AMS 4082 AMS 4093 Superseded by AMS 4083 AMS 4113 6061-T6 Extruded shapes AMS 4115 6061-0 Cold finished bars, rod, wire AMS 4116 6061-T4 Cold finished bars, rod, wire AMS 4117 6061-T6/T651 Cold finished bars, rod, wire AMS 4127 6061-T6 Forgings Rolled or Forged AMS 4128 6061-T451 Bars Rolled or Forged AMS 4129 6061-T651 Superseded by 4117 AMS 4146 6061-T4 Forgings AMS 4150 6061-T6 Extrusions and Rings AMS 4160 6061-0 Extrusion AMS 4161 6061-T4 Extrusion AMS 4172 6061-T4511 Extrusion AMS 4173 6061-T6511 Extrusion |
QQ-A-200/8 6061-T6/T6511 Extruded bar, tube, section QQ-A-200/16 6061-T6 extruded stuctural shapes QQ-A-225/8 6061-T6 / T651 Cold finished bar, tube, section QQ-A-250/11 6061 Sheet and Plate WW-T-700/6 6061-T6 Seamless, drawn tube MIL-T-7081 6061-T6 Hydraulic tube QQ-A-367 6061 Forgings |
WS 3.3211 WS 3.3214 EN 2392 6061-T6 Tube EN 2694 6061-T6 Sheet, strip EN 3341 6061-T4 Sheet, strip EN 3342 6061-T4 Extruded bar EN 3557 EN 4213 6061-T651 Plate |
AWCO-22 Birmetal-016 BA22 Duricilium-Q Hiduminium-43 LA 380 ABM 2-3023 ABM 2-3025 ABM 2-3026 ABS 5144 ABS 5151 BACM 123 BACM 171 6061-0 Tube A-GSUC L-3453 ASN-A-3277 NCT 15-238-01 AIR 9048.210 6061-0 Sheet AIR 9048.220 6061-T4 Sheet AIR 9048.230 6061-0 Sheet AIR 9048.240 6061-T6 Sheet AIR 9049 |
Aluminum Alloy Heat Treatment Temper Designations
Basic Aluminum Heat Treatment Designations
- F As Fabricated
- O Annealed
- H Strain Hardened
- W Solution Heat Treated
- T Solution Heat Treated
Heat Treating T Temper Codes
- T1 – Cooled from an elevated temperature shaping process and naturally aged to a substantially stable condition.
- T2 – Cooled from an elevated temperature shaping process, cold worked, and naturally aged to a substantially stable condition.
- T3 – Solution heat treated, cold worked, and naturally aged to a substantially stable condition.
- T4 – Solution heat treated, and naturally aged to a substantially stable condition.
- T5 – Cooled from an elevated temperature shaping process then artificially aged.
- T6 – Solution heat treated then artificially aged.
- T7 – Solution heat treated then overaged/stabilized.
- T8 – Solution heat treated, cold worked, then artificially aged.
- T9 – Solution heat treated, artificially aged, then cold worked.
- T10 – Cooled from an elevated temperature shaping process, cold worked, then artificially aged.
Additional digits may be used after the first T temper digit to indicate subsequent stress relieving by processes such as stretching, compressing, or a combination.
H Temper Strain Hardening Codes
- H1 – Strain hardened only
- H2 – Strain hardened and partially annealed
- H3 – Strain hardened and stabilized
- H4 – Strain hardened and lacquered or painted. This assumes that thermal affects from the coating process affect the strain hardening; seldom encountered.
6061 Packing Information of Aluminum plate :
Application of 6061 Aluminium Sheet
6061 Aluminium Sheet is the most widely used form of Industrial Aluminium. 6061 Aluminium Sheets find applications in various industries such as manufacturing cans and packages, transportation, home appliances, building and construction.
6061 Aluminium Sheet Applications
