7075 Aluminium Plate
Aluminium 7075 Plate is one of the highest strength aluminum alloys available. 7075 Aluminium Plate’s strength-to weight ratio is excellent and it is ideally used for highly stressed parts. It may be formed in the annealed condition and subsequently heat treated. Spot or flash welding can be used, although arc and gas welding are not recommended. Aluminium Plate 7075 is available in the clad (“Alclad”) form to improve the corrosion resistance with the over-all high strength being only moderately affected. Applications: Used where highest strength is needed.
7075 Aluminium Plate ASTM B209, ASTM-B-209, EN573, and EN485 international standards.
AMS 4045 Alclad Plate, ENAW 7075 Plate, WNR 3.4365 Plate, DIN 3.4365, PA9, AlZn5,5MgCu, HB 170 Rolled plates
stock 7075-T651, 7075-T6511, 7075-T7351, 7075-T3511 and 7075-T76511
Sasa alloy Incorporation is the leading manufacturer and exporter of 7075 Aluminium Plate. Supplier of ASTM B209 7075 Aluminium Plate from 0.5mm to 5mm Thick 1000mm x 1000mm to 2500mm x 1250mm Tempers manufactured in accordance with international standards ASTM B209, ASTM-B-209, EN573, and EN485, check 7075 Aluminium Plate price. The general widths of 7075 H16 Aluminum Plates are 1000mm, 1250mm and 1500mm, while common lengths are 2000mm, 2500 mm and 3000mm respectively. Wholesale Trader of 7075 Commercial Aluminium Plate offered by Sasa alloy , China. Stockist of 7075 Aluminium Plate, H32 7075 Aluminium Stucco Plate, H38 Commercial 7075 Aluminium Plate, ASME SB209 7075 Aluminium Patterned Plate, 7075 Mill Finish, 7075 Aluminium Extruded Plate, 7075 Aluminium Plate and 7075 Aluminium Plate in China.
7075 Aluminium Plate Suppliers in UNS A97075 Aluminium Plate stockist in China, 7075 Aluminium Corrugated Plate Suppliers in Best Price of EN AW 7075 H14 Aluminium Plate
You may intrested in:
- 7075 Aluminium Chequered Plate
- 7075 Aluminium Checker Plate
- 7075 Aluminium Diamond Plate
- 7075 Aluminium Tread Plate
Standard Dimensions of 7075 Aluminium Plate
Standard dimensions (a x b) of Aluminium 7075 Plate
Aluminium 7075 Plate up to 9.9 mm
2.000 x 1.000 mm
2.500 x 1.250 mm
3.000 x 1.500 mm
Oversize Aluminium 7075 Plate
4.000 x 2.000 mm
6.000 x 2.500 mm
8.000 x 2.500 mm
Other dimensions on request
7075 Aluminium Plate Suppliers in China, 7075 Aluminium Plate Supplier Singapore, Dealer & Distributor of All 7075 Aluminium Alloy Plate Grades, Stockholder of 7075 Aluminium Plate 1mm, Aluminum 7075 Plate suppliers
| Aluminium Alloy | ASTM B209 7075 |
| Aluminium 7075 Plate Temper | O, H12, H14, H16, H18, H22, H24, H26, H32, H112 |
| Aluminium 7075 Plate Thickness | 0.5mm-150mm |
| Aluminium 7075 Plate Width | 500-2000mm |
| Aluminium 7075 Plate Length | to clients’ requirement |
| Aluminium 7075 Plate Coating | Polyester, Fluorocarbon, polyurethane and epoxy coating |
| 7075 Aluminium Plate Coating finish | PVDF, POLYESTER(PE) |
| Aluminium 7075 Plate Surface | Polished, hair line, brush, sand blast, checkered, embossed, etching, etc. Mill finish, Bright finish, paper interleaved, one side film, both sides film. |
| Aluminium 7075 Plate Gloss | Meet the customer requirement |
| Total coating thickness of Aluminium 7075 Plate | PVDF coating: More than 25 micron; Polyester coating: More than 18 micron |
| Aluminium 7075 Plate Coating hardness | (pencil hardness) more than 2H |
| Aluminium 7075 Plate Coating adhesive | No lower than1st grade |
| Aluminium 7075 Plate Impact resistance | No cracking or peeling (50kg/cm, ASTMD-2794: 1993) |
| Aluminium 7075 Plate Flexibility (T-bend) | 2T |
| Aluminium 7075 Plate MEK resistance | More than 10 |
| Available Aluminium 7075 Plate Stock Sizes | 1ft x 1ft, 1ft x 2ft, 1ft x 4ft, 2ft x 2ft, 2ft x 4ft, 4ft x 4ft, 4ft x 8ft, 4ft x 10ft or Cut to Size or Custom Shape. |
| Aluminium 7075 Plate Delivery Time | 30-60 days after receiving the prepayment |
| Aluminium 7075 Plate Packaging Details | Standard export package. One pallet is about 2-3 ton.Two steel belts in width and three in width. One 20GP container can load about 18-20 tons Aluminium 7075 Plate. One 40GP container can load about 24 tons Aluminium 7075 Plate |
| ASTM B209 Alloy 7075 Plate Outer packing | Export standard, wooden pallet |
| Bottom side Aluminium 7075 Plate is coated with protective polyester material, thickness more than 6 micron | |
| We Export Aluminium 7075 Plate to | Singapore, Indonesia, Ukraine, Korea, Thailand, Vietnam, Saudi Arabia, Brazil, Spain, Canada, USA, Egypt, Iran, China, Kuwait, Dubai, Oman, Kuwait, Peru, Mexico, Iraq, Russia, Malaysia, etc. |
| AUTHORIZED DISTRIBUTORS OF , NALCO, , THYSSENKRUPP, VIRGO, MANKASIA AND METENERE | |
Types of 7075 Aluminium Plate Manufacturer in China
| 7075 Aluminium Plates Product Range | ||||
|---|---|---|---|---|
| Alloy No. | Thickness (mm) |
Width (mm) |
Length (mm) |
Temper |
| 7075 Aluminium Plate | 0.2-5.0 | 20-2200 | 20-8000 | O, H12, H22, H14, H16, H18, H24, H26 |
Standard Specification of 7075 Aluminium Plate
Standards and specifications by country
| Specification | Alloy | Temper | Company |
|---|---|---|---|
| Europe | |||
| EN 2696 | 7075 | T6(T62) | |
| EN 2092 | 7075 clad | T6(T62) | |
| AIR 9048.260/.270 | 7075 | T6/T76 | |
| AIR 9048.280 | 7075 clad | T6 | |
| Germany | |||
| W.-Nr. 3.4364 | 7075 | T6 | |
| W.-Nr. 3.4374 | 7075 clad | O(T62), T6 | |
| W.-Nr. 3.4377 | 7475 clad | T76 | |
| UK | |||
| BS L88 | 7075 clad | T6 | |
| USA | |||
| AMS QQ-A-250/12 | 7075 | O, T6, T73 | |
| AMS QQ-A-250/24 | 7075 | T76 | |
| AMS QQ-A-250/13 | 7075 clad | O, T6, T73 | |
| AMS QQ-A-250/26 | 7075 clad with 7011 | T76 | |
| AMS QQ-A-250/25 | 7075 clad with 7072 | T76 | |
7075 Aluminium Plate Sizes
| Sizes (mm) | Theoretical Mass KG/Plate |
|---|---|
| 2000 X 1000 X 0.5 | 2500 X 1250 X 0.5 |
| 2000 X 1000 X 0.7 | 2500 X 1250 X 0.7 |
| 2000 X 1000 X 0.9 | 2500 X 1250 X 0.9 |
| 2000 X 1000 X 1.2 | 2500 X 1250 X 1.2 |
| 3000 X 1500 X 1.2 | 2000 X 1000 X 1.6 |
| 2500 X 1250 X 1.6 | 3000 X 1500 X 1.6 |
| 2000 X 1000 X 2.0 | 2500 X 1250 X 2.0 |
| 3000 X 1500 X 2.0 | 2500 X 1250 X 2.5 |
| 2.79 | 4.36 |
| 3.91 | 6.10 |
| 5.02 | 7.85 |
| 6.74 | 10.46 |
| 15.01 | 8.93 |
| 13.95 | 20.09 |
| 11.16 | 17.44 |
| 25.11 | 21.80 |
7075 Aluminium Plate Weight Chart
Width: 1.000 mm | Length: 2.000 mm
| Product | Thickness | Weight |
|---|---|---|
| 7075 Aluminium Plate | 0,30 mm | 0,810 Kg/m2 |
| 7075 Aluminium Plate | 0,40 mm | 1,080 Kg/m2 |
| 7075 Aluminium Plate | 0,50 mm | 1,350 Kg/m2 |
| 7075 Aluminium Plate | 0,60 mm | 1,620 Kg/m2 |
| 7075 Aluminium Plate | 0,70 mm | 1,890 Kg/m2 |
| 7075 Aluminium Plate | 0,80 mm | 2,160 Kg/m2 |
| 7075 Aluminium Plate | 0,90 mm | 2,430 Kg/m2 |
| 7075 Aluminium Plate | 1,00 mm | 2,700 Kg/m2 |
| 7075 Aluminium Plate | 1,20 mm | 3,240 Kg/m2 |
| 7075 Aluminium Plate | 1,40 mm | 3,780 Kg/m2 |
| 7075 Aluminium Plate | 1,50 mm | 4,050 Kg/m2 |
| 7075 Aluminium Plate | 1,60 mm | 4,320 Kg/m2 |
| 7075 Aluminium Plate | 1,80 mm | 4,860 Kg/m2 |
| 7075 Aluminium Plate | 2,00 mm | 5,400 Kg/m2 |
| 7075 Aluminium Plate | 2,20 mm | 5,940 Kg/m2 |
| 7075 Aluminium Plate | 2,50 mm | 6,750 Kg/m2 |
| 7075 Aluminium Plate | 3,00 mm | 8,100 Kg/m2 |
| 7075 Aluminium Plate | 4,00 mm | 10,800 Kg/m2 |
| 7075 Aluminium Plate | 5,00 mm | 13,500 Kg/m2 |
| 7075 Aluminium Plate | 6,00 mm | 16,200 Kg/m2 |
| 7075 Aluminium Plate | 10,00 mm | 27,000 Kg/m2 |
| 7075 Aluminium Plate | 12,00 mm | 32,400 Kg/m2 |
| 7075 Aluminium Plate | 15,00 mm | 40,500 Kg/m2 |
| 7075 Aluminium Plate | 20,00 mm | 54,000 Kg/m2 |
7075 Aluminium Plate Chemical Composition
| Alloy (ISS) | Equivalent alloy (A.A) | Copper | Magnesium | Silicon | Iron | Managanese Others* (Total) | Remarks | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Old | New | U.S.A | Min. | Max. | Min. | Max. | Min. | Max. | Min. | Max. | Max | Max. | Aluminum 99.0% Min. | ||
| — | — | 7075 | 1.20 | 2.0 | 2.1 | 2.9 | — | 0.5 | 0.7 | — | 0.3 | 0.2 | Zinc (5.1-6.1) & Chromium (0.2-0.28) | ||
Aluminium 7075 Plate Mechanical Properties
| Mechanical Properties of Aluminium 7075-T6 Sheet | |||
| Hardness, Brinell | 150 | 150 | AA; Typical; 500 g load; 10 mm ball |
| Hardness, Knoop | 191 | 191 | Converted from Brinell Hardness Value |
| Hardness, Rockwell A | 53.5 | 53.5 | Converted from Brinell Hardness Value |
| Hardness, Rockwell B | 87 | 87 | Converted from Brinell Hardness Value |
| Hardness, Vickers | 175 | 175 | Converted from Brinell Hardness Value |
| Ultimate Tensile Strength | 572 MPa | 83000 psi | AA; Typical |
| Tensile Yield Strength | 503 MPa | 73000 psi | AA; Typical |
| Elongation at Break | 11 % | 11 % | AA; Typical; 1/16 in. (1.6 mm) Thickness |
| Elongation at Break | 11 % | 11 % | AA; Typical; 1/2 in. (12.7 mm) Diameter |
| Modulus of Elasticity | 71.7 GPa | 10400 ksi | AA; Typical; Average of tension and compression. Compression modulus is about 2% greater than tensile modulus. |
| Poisson’s Ratio | 0.33 | 0.33 | |
| Fatigue Strength | 159 MPa | 23000 psi | AA; 500,000,000 cycles completely reversed stress; RR Moore machine/specimen |
| Fracture Toughness | 20 MPa-m½ | 18.2 ksi-in½ | K(IC) in S-L Direction |
| Fracture Toughness | 25 MPa-m½ | 22.8 ksi-in½ | K(IC) in T-L Direction |
| Fracture Toughness | 29 MPa-m½ | 26.4 ksi-in½ | K(IC) in L-T Direction |
| Machinability | 70 % | 70 % | 0-100 Scale of Aluminum Alloys |
| Shear Modulus | 26.9 GPa | 3900 ksi | |
| Shear Strength | 331 MPa | 48000 psi | AA; Typical |
| Alloy Designation | UK Specifications |
US Specifications |
US Federal Specifications |
European Specifications |
Other |
|---|---|---|---|---|---|
| 7075 A97075 A87075 |
BS 2 L95 Alloy 7075-T651 Plate BS 2 L88 Alloy 7075-T6 Clad Plate BS L160 Alloy 7075-T73511 BS L161 Alloy 7075 BS L162 Alloy 7075 BS L170 Alloy 7075-T6511 DTD 5110 7075 Clad Plate DTD 5124 7075 |
AMS 4038 7075-T651 Superseded by AMS 4045 AMS 4039 7075-T651 Superseded by AMS 4049 AMS 4044 7075 -0 Plate AMS 4045 7075-T6 T651 Plate AMS 4046 7075-T6 Alclad one side Plate, T651 Plate AMS 4048 7075-T0 Alclad Plate AMS 4049 7075 -T6 Alclad T651 Plate AMS 4078 7075-T351 Plate AMS 4122 7075-T6 AMS 4123 7075-T651 AMS 4124 7075-T7351 AMS 4126 7075-T6 AMS 4131 7075-T74 AMS 4139 7075 AMS 4141 7075-T73 AMS 4147 7075-T7352 AMS 4154 7075-T6 Extrusions AMS 4166 7075-T73 Extrusion AMS 4167 7075-T73511 Extrusions AMS 4168 7075-T6511 Extrusions Unstraightened AMS 4169 7075-T6511 Extrusions Straightened AMS 4174 7075-T73 AMS 4186 7075-TF AMS 4187 7075-0 |
QQ-A-250/13 7075-0 Alclad plate QQ-A-250/13 7075-T6 Alclad plate QQ-A-250/18 7075-0 Clad one side, plate QQ-A-250/18 7075-T6 Clad one side, plate QQ-A-250/24 7075-T7651 Plate QQ-A-250/25 7075 plate, clad with7072-T76 QQ-A-250/26 7075 plate, clad with7011-T76 QQ-A-367 Alloy 7075-T6 MIL-A-22771 |
EN 2127 | AIR 9048.690 7075-T7351 Plate AIR 9048.700 7075-T7351 Plate AIR 9048.710 7075-T7351 Plate AIR 9049 |
Key Words: Aluminium 7075-T6; Aluminium 7075-T651, UNS A97075; ISO AlZn5.5MgCu; Aluminium 7075-T6; Aluminium 7075-T651; AA7075-T6
| Aluminium 7075 Plate | ||||
|---|---|---|---|---|
| 4038 | Aluminium Alloy 7075 T651 | plate | ./. | ./. |
| 4039 | Aluminium Alloy 7075 T651 | plate | ./. | ./. |
| 4044 | Aluminium Alloy 7075 T0 | plate | A97075 | ASTM B 209 |
| 4045 | Aluminium Alloy 7075 | plate | A97075 | ASTM B 209 T651 |
| 4046 | Aluminium Alloy | Alclad plate | A87075 | FED-QQ-A-250/8F – T651 |
| 4048 | Aluminium Alloy 7075 T0 | Alclad plate | A87075 | ASTM B209 |
| 4049 | Aluminium Alloy 7075 | Alclad plate | A87075 | FED-QQ-A-250/13 – T651 |
| 4078 | Aluminium Alloy 7075 T7351 | Plates | A97075 | ./. |
| 4277 | Aluminium Alloy 7075 T0 | Sheet | ./. | ASTM B 209 |
| 4278 | Aluminium Alloy 7075 T0 | Alclad Sheet | A87075 | ASTM B 209 |
Aluminum Alloy Heat Treatment Temper Designations
Basic Aluminum Heat Treatment Designations
- F As Fabricated
- O Annealed
- H Strain Hardened
- W Solution Heat Treated
- T Solution Heat Treated
Heat Treating T Temper Codes for Aluminium 7075 Plates
- T1 – Cooled from an elevated temperature shaping process and naturally aged to a substantially stable condition.
- T2 – Cooled from an elevated temperature shaping process, cold worked, and naturally aged to a substantially stable condition.
- T3 – Solution heat treated, cold worked, and naturally aged to a substantially stable condition.
- T4 – Solution heat treated, and naturally aged to a substantially stable condition.
- T5 – Cooled from an elevated temperature shaping process then artificially aged.
- T6 – Solution heat treated then artificially aged.
- T7 – Solution heat treated then overaged/stabilized.
- T8 – Solution heat treated, cold worked, then artificially aged.
- T9 – Solution heat treated, artificially aged, then cold worked.
- T10 – Cooled from an elevated temperature shaping process, cold worked, then artificially aged.
Additional digits may be used after the first T temper digit to indicate subsequent stress relieving by processes such as stretching, compressing, or a combination.
H Temper Strain Hardening Codes for Aluminium 7075 Plates
- H1 – Strain hardened only
- H2 – Strain hardened and partially annealed
- H3 – Strain hardened and stabilized
- H4 – Strain hardened and lacquered or painted. This assumes that thermal affects from the coating process affect the strain hardening; seldom encountered.
Application of 7075 Aluminium Plate
7075 Aluminium Plate is the most widely used form of Industrial Aluminium. 7075 Aluminium Plates find applications in various industries such as manufacturing cans and packages, transportation, home appliances, building and construction.
