7075 T6 Aluminium Round Bar

7075 T6 Aluminium Round Bar Featured Image
  • 7075 T6 Aluminium Round Bar
  • 7075 T6 Aluminium Round Bar
  • 7075 T6 Aluminium Round Bar
  • 7075 T6 Aluminium Round Bar

Short Description:

7075 T6 Aluminum Bar (UNS A97075) is an aerospace aluminum bar with cold finished or extruded aluminum wrought alloy with high strength, adequate machinability and improved stress corrosion control. Fine grain control results in good tool wear. 7075-T6/T651 Cold Finish Aluminum Rectangle Bar is a high strength product originally developed for aircraft frames. Comparable to many steels, 7075 T6 Aluminum Rod has good fatigue strength and average machinability. Aluminum 7075 Round Rod is one of ...
  • FOB Price: Ton/Ton 2000-5000USD
  • Min.Order Quantity: As Customer Required
  • Supply Ability: 2000Tons Per Month
  • Port: Shanghai Ningbo
  • Payment Terms: T/T L/C Westerrn Union
    • Download as PDF

    Product Detail

    Product Tags

    7075 T6 Aluminum Bar (UNS A97075) is an aerospace aluminum bar with cold finished or extruded aluminum wrought alloy with high strength, adequate machinability and improved stress corrosion control. Fine grain control results in good tool wear.

    7075-T6/T651 Cold Finish Aluminum Rectangle Bar is a high strength product originally developed for aircraft frames. Comparable to many steels, 7075 T6 Aluminum Rod has good fatigue strength and average machinability.

    Aluminum 7075 Round Rod is one of the highest strength aluminum alloys. It has good fatigue strength and average machinability. Often used where parts are highly stressed. It is not weld able and has less corrosion resistance than other aluminum alloys. The mechanical properties depend on the temper of the material. Commonly used in the bicycle industry, aircraft structures, and in rifles for the American military. We are a leading exporter of 7075-T651, 7075-T6511, 7075-T7351, 7075-T3511 and 7075-T76511 in China.

    7075 T6 Aluminium Round Bar ASTM B221, EN573, and EN485 international standards.
    AMS 4147 Round Bar, stock 7075-T651, 7075-T6511, 7075-T7351, 7075-T3511 and 7075-T76511, ENAW 7075 Bar, WNR 3.4365 Rod, DIN 3.4365, PA9, AlZn5,5MgCu, HB 170 Round Bar

    Sasa alloy Incorporation is the leading manufacturer and exporter of 7075 T6 Aluminium Round Bar. Supplier of ASTM B221 7075 T6 Aluminium Round Bar in Tempers manufactured in accordance with international standards ASTM B221, ASME SB 221, EN573, and EN485, check 7075 T6 Aluminium Round Bar price. Wholesale Trader of 7075 T6 Commercial Aluminium Bar offered by Sasa alloy , China. Stockist of 7075 T6 Aluminium Rod, H32 7075 T6 Aluminium Hex Bar, H38 Commercial 7075 T6 Aluminium Flat Bar, ASME SB221 7075 T6 Aluminium Square Bar, 7075 T6 Mill Finish, 7075 T6 Aluminium Half Round Bar, 7075 T6 Cold Finished Round Bar and 7075 T6 Aluminium Cold Drawn Round Bar in China.

    Aluminium 7075 T6 Round Bar Manufacturer, 7075 T6 Aluminium Black Bar Suppliers in UNS A97075 T6 Aluminium Hexagon Bar dealers in China, 7075 T6 Aluminium Round Bar Suppliers in Best Price of EN AW 7075 T6 Flat Bar, ASME SB 211 AA7075-T651 Threaded Rods, AL7075 T6 Cold Drawn Bars Suppliers

    You may intrested in:

    7075 T6 Aluminium Square Bar Suppliers in China, 7075 T6 Aluminium Black Bars Supplier Singapore, Dealer & Distributor of All 7075 T6 Aluminium Alloy Polish Bar Grades, Stockholder of 7075 T6 Aluminium Welding Rods offer Best Price in China & China, Manufacturer of Aluminium 7075 T6 Round Bar

    Aluminium Alloy ASTM B221 7075 T6
    Standard  ASTM, ASME, AMS, ASTM B221M, GB/T 3191, JIS H4040, ASTM B221, AMS QQ-A-200/9
    Specifications ASTM B211, AMS 4122, AMS 4123, AMS 4124, AMS4186, AMS-QQ-A-225/9, ASTM B221, AMS 4154, AMS 4166, AMS 4167, AMS-QQ-A-200/11
    Aluminium 7075 T6 Round Bar Temper O, H12, H14, H16, H18, H22, H24, H26, H32, H112
    Tempers: T6, T651, T73, T7351
    Aluminium 7075 T6 Bar Form 7075 T6 Aluminium Square, Round, Hex, Flat, Half Round, Oval, Angle, Rectangular, Wire in Black & Bright Finish
    Aluminium 7075 T6 Round Bar Diameter:0.1-600mm,etc
    Aluminium 7075 T6 Hexagonal Bar Diameter:0.1-600mm,etc
    Aluminium 7075 T6 Angle Bar Size:0.5mm*40mm*40mm-20mm*400mm*400mm
    Aluminium 7075 T6 Flat Bar Thickness:0.1-600mm,etc
    Width:1-2500mm,etc
    Aluminium 7075 T6 Square Bar Size:1mm*1mm-800mm*800mm, etc
    Aluminium 7075 T6 Round Bar Length 1-12m, Random, Fix & Cut Length or as per clients’ requirement
    Aluminium 7075 T6 Bar Bright, Polish & Black
    Aluminium 7075 T6 Bars Surface Anodized, Polished, hair line, brush,
    Mill finished, Bright finish, paper interleaved
    Aluminium 7075 T6 Solid Round Bar Delivery Time 10-30 days after receiving the prepayment
    Aluminium 7075 T6 Round Bar Packaging Details Export standard package: bundled wooden box, suit for all kinds of transport or be required.
    ASTM B221 Alloy 7075 T6 Round Bar Outer packing Export standard, wooden pallet
    We Export Aluminium 7075 T6 Round Bar to Singapore, Indonesia, Ukraine, Korea, Thailand, Vietnam, Saudi Arabia, Brazil, Spain, Canada, USA, Egypt, Iran, China, Kuwait, Dubai, Oman, Kuwait, Peru, Mexico, Iraq, Russia, Malaysia, etc.

    Types of 7075 T6 Aluminium Round Bar Manufacturer in China

    IMG_5596_副本     7075 T6 Cold Rolled Round Bar

    7075 T6 Aluminium Angle Bar    7075 T6 Aluminium Bright Bar

    7075 T6 Aluminium Threaded Rods stockholder in China, 7075 T6 Aluminium Forged Round Bars wholesaler in China, Aluminium EN AW 7075 T6 Cold Finish Round Bar importers in China, 7075 T6 Aluminium Hexagonal Rods Cut To Size At Best Price

    Specialized in:

    7075-T6 Aluminum Half Oval Bar:  AMS-QQ-A-225/9, ASTM-B-211, AMS-4122, AMS-4123, AMS-4124
    7075-T651 Aluminum Half Oval Bar:  AMS-QQ-A-225/9, ASTM-B-211, AMS-4122, AMS-4123, AMS-4124
    7075-T-73 Aluminum Half Oval Bar:  AMS-QQ-A-225/9, ASTM-B-211, AMS-4122, AMS-4123, AMS-4124
    7075-T7351 Aluminum Half Oval Bar:  AMS-QQ-A-225/9, ASTM-B-211, AMS-4122, AMS-4123, AMS-4124
    7075-T6 Aluminum Half Round Bar:  AMS-QQ-A-225/9, ASTM-B-211, AMS-4122, AMS-4123, AMS-4124
    7075-T651 Aluminum Half Round Bar:  AMS-QQ-A-225/9, ASTM-B-211, AMS-4122, AMS-4123, AMS-4124
    7075-T-73 Aluminum Half Round Bar:  AMS-QQ-A-225/9, ASTM-B-211, AMS-4122, AMS-4123, AMS-4124
    7075-T7351 Aluminum Half Round Bar:  AMS-QQ-A-225/9, ASTM-B-211, AMS-4122, AMS-4123, AMS-4124
    7075-T6 Aluminum Hex Bar:  AMS-QQ-A-225/9, ASTM-B-211, AMS-4122, AMS-4123, AMS-4124
    7075-T651 Aluminum Hex Bar:  AMS-QQ-A-225/9, ASTM-B-211, AMS-4122, AMS-4123, AMS-4124
    7075-T-73 Aluminum Hex Bar:  AMS-QQ-A-225/9, ASTM-B-211, AMS-4122, AMS-4123, AMS-4124
    7075-T7351 Aluminum Hex Bar:  AMS-QQ-A-225/9, ASTM-B-211, AMS-4122, AMS-4123, AMS-4124
    7075-T6 Aluminum Flat Bar:  AMS-QQ-A-225/9, ASTM-B-211, AMS-4122, AMS-4123, AMS-4124
    7075-T651 Aluminum Flat Bar:  AMS-QQ-A-225/9, ASTM-B-211, AMS-4122, AMS-4123, AMS-4124
    7075-T73 Aluminum Flat Bar:  AMS-QQ-A-225/9, ASTM-B-211, AMS-4122, AMS-4123, AMS-4124
    7075-T7351 Aluminum Flat Bar:  AMS-QQ-A-225/9, ASTM-B-211, AMS-4122, AMS-4123, AMS-4124
    7075-T6 Aluminum Round Bar:  AMS-QQ-A-225/9, ASTM-B-211, AMS-4122, AMS-4123, AMS-4124
    7075-T651 Aluminum Round Bar:  AMS-QQ-A-225/9, ASTM-B-211, AMS-4122, AMS-4123, AMS-4124
    7075-T73 Aluminum Round Bar:  AMS-QQ-A-225/9, ASTM-B-211, AMS-4122, AMS-4123, AMS-4124
    7075-T7351 Aluminum Round Bar:  AMS-QQ-A-225/9, ASTM-B-211, AMS-4122, AMS-4123, AMS-4124
    7075-T6 Aluminum Square Bar:  AMS-QQ-A-225/9, ASTM-B-211, AMS-4122, AMS-4123, AMS-4124
    7075-T651 Aluminum Square Bar:  AMS-QQ-A-225/9, ASTM-B-211, AMS-4122, AMS-4123, AMS-4124
    7075-T73 Aluminum Square Bar:  AMS-QQ-A-225/9, ASTM-B-211, AMS-4122, AMS-4123, AMS-4124
    7075-T7351 Aluminum Square Bar:  AMS-QQ-A-225/9, ASTM-B-211, AMS-4122, AMS-4123, AMS-4124

     

    Standard Dimensions of 7075 T6 Aluminium Round Bar

    Standard dimensions

    • 6 mm 7075 T6 Aluminum Round Bar
    • 8 mm 7075 T6 Aluminum Round Bar
    • 9 mm 7075 T6 Aluminum Round Bar
    • 10 mm 7075 T6 Aluminum Round Bar
    • 12 mm 7075 T6 Aluminum Round Bar
    • 12.7 mm 7075 T6 Aluminum Round Bar
    • 14 mm 7075 T6 Aluminum Round Bar
    • 16 mm 7075 T6 Aluminum Round Bar
    • 18 mm 7075 T6 Aluminum Round Bar
    • 19.05 mm 7075 T6 Aluminum Round Bar
    • 20 mm 7075 T6 Aluminum Round Bar
    • 22 mm 7075 T6 Aluminum Round Bar
    • 24 mm 7075 T6 Aluminum Round Bar
    • 25.4 mm 7075 T6 Aluminum Round Bar
    • 27 mm 7075 T6 Aluminum Round Bar
    • 30 mm 7075 T6 Aluminum Round Bar
    • 31.75 mm 7075 T6 Aluminum Round Bar
    • 33 mm 7075 T6 Aluminum Round Bar
    • 36 mm 7075 T6 Aluminum Round Bar
    • 38.1 mm 7075 T6 Aluminum Round Bar
    • 39 mm 7075 T6 Aluminum Round Bar
    • 42 mm 7075 T6 Aluminum Round Bar
    • 45 mm 7075 T6 Aluminum Round Bar
    • 50 mm 7075 T6 Aluminum Round Bar
    • 55 mm 7075 T6 Aluminum Round Bar
    • 60 mm 7075 T6 Aluminum Round Bar
    • 65 mm 7075 T6 Aluminum Round Bar
    • 70 mm 7075 T6 Aluminum Round Bar
    • 75 mm 7075 T6 Aluminum Round Bar
    • 80 mm 7075 T6 Aluminum Round Bar
    • 90 mm 7075 T6 Aluminum Round Bar
    • 100 mm 7075 T6 Aluminum Round Bar
    • 110 mm 7075 T6 Aluminum Round Bar
    • 120 mm 7075 T6 Aluminum Round Bar
    • 130 mm 7075 T6 Aluminum Round Bar
    • 140 mm 7075 T6 Aluminum Round Bar
    • 150 mm 7075 T6 Aluminum Round Bar
    • 160 mm 7075 T6 Aluminum Round Bar
    • 165 mm 7075 T6 Aluminum Round Bar
    • 180 mm 7075 T6 Aluminum Round Bar
    • 190.5 mm 7075 T6 Aluminum Round Bar
    • 210 mm 7075 T6 Aluminum Round Bar
    • 228 mm 7075 T6 Aluminum Round Bar
    • 250 mm 7075 T6 Aluminum Round Bar
    • 305 mm 7075 T6 Aluminum Round Bar

    Aluminium 7075 T6 Round Bar Manufacturers, Cold Drawn 7075 T6 Aluminium Bar, Cold Forming 7075 T6 Aluminium Material Rod, Cold Rolled 7075 T6 Aluminium Round Rod, 7075 T6 Aluminum Alloy Hollow Bar, UNS A96082 Round Bar Manufacturer in China, EN 485-2 7075 T6 Aluminium Bars & Rods stockist, 7075 T6 Aluminium Round Bar Price in China

     

    Standard Specification of 7075 T6 Aluminium Round Bar

    Standards and specifications by country

    Specification Alloy Temper Company
    Europe
    EN 2696 7075 T6(T62)  
    EN 2092 7075 clad T6(T62)  
    AIR 9048.260/.270 7075 T6/T76  
    AIR 9048.280 7075 clad T6  
    Germany
    W.-Nr. 3.4364 7075 T6  
    W.-Nr. 3.4374 7075 clad O(T62), T6  
    W.-Nr. 3.4377 7475 clad T76  
    UK
    BS L88 7075 clad T6  
    USA
    AMS QQ-A-250/12 7075 O, T6, T73  
    AMS QQ-A-250/24 7075 T76  
    AMS QQ-A-250/13 7075 clad O, T6, T73  
    AMS QQ-A-250/26 7075 clad with 7011 T76  
    AMS QQ-A-250/25 7075 clad with 7072 T76
    STANDARD WERKSTOFF NR. UNS EN
    Aluminium 7075 T6 3.4365 A97075 AW-7075

     

    7075 T6 Aluminium Round Bar Equivalent Grades

    China
    		 U.S.A.
    		 BRITAIN
    		 CANADA GERMANY
    		 RUSSIA
    		 I.S.O.
    		 FRENCH
    New IS Old IS (A.A.)
    		 (B.S.)
    		   (DIN) – – –
    – – 7075 DTD-5124 75S   – Al-Zn 6 Mg Cu 7075

     

    7075 T6 Aluminium Round Bar Weight Chart

    7075 T6 Aluminium Round Bar Weight Chart

    Product Diameter Weight
    7075 T6 Aluminium Round Bar 6 mm 0,076 Kg/m
    7075 T6 Aluminium Round Bar 7 mm 0,104 Kg/m
    7075 T6 Aluminium Round Bar 8 mm 0,136 Kg/m
    7075 T6 Aluminium Round Bar 9 mm 0,172 Kg/m
    7075 T6 Aluminium Round Bar 9,5 mm 0,191 Kg/m
    7075 T6 Aluminium Round Bar 10 mm 0,212 Kg/m
    7075 T6 Aluminium Round Bar 11 mm 0,257 Kg/m
    7075 T6 Aluminium Round Bar 12 mm 0,305 Kg/m
    7075 T6 Aluminium Round Bar 12,5 mm 0,331 Kg/m
    7075 T6 Aluminium Round Bar 13 mm 0,358 Kg/m
    7075 T6 Aluminium Round Bar 14 mm 0,416 Kg/m
    7075 T6 Aluminium Round Bar 16 mm 0,543 Kg/m
    7075 T6 Aluminium Round Bar 16,5 mm 0,577 Kg/m
    7075 T6 Aluminium Round Bar 18 mm 0,687 Kg/m
    7075 T6 Aluminium Round Bar 19 mm 0,766 Kg/m
    7075 T6 Aluminium Round Bar 20 mm 0,848 Kg/m
    7075 T6 Aluminium Round Bar 22 mm 1,026 Kg/m
    7075 T6 Aluminium Round Bar 25 mm 1,325 Kg/m
    7075 T6 Aluminium Round Bar 28 mm 1,663 Kg/m
    7075 T6 Aluminium Round Bar 30 mm 1,909 Kg/m
    7075 T6 Aluminium Round Bar 31 mm 2,038 Kg/m
    7075 T6 Aluminium Round Bar 32 mm 2,171 Kg/m
    7075 T6 Aluminium Round Bar 35 mm 2,598 Kg/m
    7075 T6 Aluminium Round Bar 38 mm 3,062 Kg/m
    7075 T6 Aluminium Round Bar 40 mm 3,393 Kg/m
    7075 T6 Aluminium Round Bar 45 mm 4,294 Kg/m
    7075 T6 Aluminium Round Bar 50 mm 5,301 Kg/m
    7075 T6 Aluminium Round Bar 55 mm 6,415 Kg/m
    7075 T6 Aluminium Round Bar 60 mm 7,634 Kg/m
    7075 T6 Aluminium Round Bar 65 mm 8,959 Kg/m
    7075 T6 Aluminium Round Bar 70 mm 10,391 Kg/m
    7075 T6 Aluminium Round Bar 75 mm 11,928 Kg/m
    7075 T6 Aluminium Round Bar 80 mm 13,572 Kg/m
    7075 T6 Aluminium Round Bar 90 mm 17,177 Kg/m
    7075 T6 Aluminium Round Bar 100 mm 21,206 Kg/m
    7075 T6 Aluminium Round Bar 105 mm 23,379 Kg/m
    7075 T6 Aluminium Round Bar 110 mm 25,659 Kg/m
    7075 T6 Aluminium Round Bar 120 mm 30,536 Kg/m
    7075 T6 Aluminium Round Bar 127 mm 34,203 Kg/m
    7075 T6 Aluminium Round Bar 130 mm 35,838 Kg/m
    7075 T6 Aluminium Round Bar 140 mm 41,563 Kg/m
    7075 T6 Aluminium Round Bar 150 mm 47,713 Kg/m
    7075 T6 Aluminium Round Bar 180 mm 68,707 Kg/m
    7075 T6 Aluminium Round Bar 200 mm 84,823 Kg/m

    Theorical Weights Table
    The values presented on this table are theorical and they should be confirmed if you make an order.

    7075 T6 Aluminium Square Bar Weight Chart

    7075 T6 Aluminium Square Bar Weight Chart

    Product Side Weight
    Aluminium Square Bar 10 mm 0,270 Kg/m
    Aluminium Square Bar 15 mm 0,608 Kg/m
    Aluminium Square Bar 16 mm 0,691 Kg/m
    Aluminium Square Bar 20 mm 1,080 Kg/m
    Aluminium Square Bar 25 mm 1,688 Kg/m
    Aluminium Square Bar 35 mm 3,308 Kg/m
    Aluminium Square Bar 45 mm 5,468 Kg/m
    Aluminium Square Bar 60 mm 9,720 Kg/m
    Aluminium Square Bar 100 mm 27,000 Kg/m

    7075 T6 Aluminium Rectangular Bar Weight Chart

    7075 T6 Aluminium Rectangular Bar Weight Chart

    Product Width   Thickness Weight
    7075 T6 Aluminium Rectangular Bar 20 mm x 2 mm 0,108 Kg/m
    7075 T6 Aluminium Rectangular Bar 15 mm x 3 mm 0,122 Kg/m
    7075 T6 Aluminium Rectangular Bar 20 mm x 3 mm 0,162 Kg/m
    7075 T6 Aluminium Rectangular Bar 25 mm x 3 mm 0,203 Kg/m
    7075 T6 Aluminium Rectangular Bar 30 mm x 3 mm 0,243 Kg/m
    7075 T6 Aluminium Rectangular Bar 40 mm x 3 mm 0,324 Kg/m
    7075 T6 Aluminium Rectangular Bar 15 mm x 4 mm 0,162 Kg/m
    7075 T6 Aluminium Rectangular Bar 20 mm x 4 mm 0,216 Kg/m
    7075 T6 Aluminium Rectangular Bar 25 mm x 4 mm 0,270 Kg/m
    7075 T6 Aluminium Rectangular Bar 30 mm x 4 mm 0,324 Kg/m
    7075 T6 Aluminium Rectangular Bar 15 mm x 5 mm 0,203 Kg/m
    7075 T6 Aluminium Rectangular Bar 20 mm x 5 mm 0,270 Kg/m
    7075 T6 Aluminium Rectangular Bar 25 mm x 5 mm 0,338 Kg/m
    7075 T6 Aluminium Rectangular Bar 30 mm x 5 mm 0,405 Kg/m
    7075 T6 Aluminium Rectangular Bar 40 mm x 5 mm 0,540 Kg/m
    7075 T6 Aluminium Rectangular Bar 50 mm x 5 mm 0,675 Kg/m
    7075 T6 Aluminium Rectangular Bar 30 mm x 6 mm 0,486 Kg/m
    7075 T6 Aluminium Rectangular Bar 40 mm x 6 mm 0,648 Kg/m
    7075 T6 Aluminium Rectangular Bar 60 mm x 6 mm 0,972 Kg/m
    7075 T6 Aluminium Rectangular Bar 20 mm x 8 mm 0,432 Kg/m
    7075 T6 Aluminium Rectangular Bar 25 mm x 8 mm 0,540 Kg/m
    7075 T6 Aluminium Rectangular Bar 30 mm x 8 mm 0,648 Kg/m
    7075 T6 Aluminium Rectangular Bar 40 mm x 8 mm 0,864 Kg/m
    7075 T6 Aluminium Rectangular Bar 50 mm x 8 mm 1,080 Kg/m
    7075 T6 Aluminium Rectangular Bar 55 mm x 8 mm 1,188 Kg/m
    7075 T6 Aluminium Rectangular Bar 60 mm x 8 mm 1,296 Kg/m
    7075 T6 Aluminium Rectangular Bar 80 mm x 8 mm 1,728 Kg/m
    7075 T6 Aluminium Rectangular Bar 100 mm x 8 mm 2,160 Kg/m
    7075 T6 Aluminium Rectangular Bar 20 mm x 10 mm 0,540 Kg/m
    7075 T6 Aluminium Rectangular Bar 25 mm x 10 mm 0,675 Kg/m
    7075 T6 Aluminium Rectangular Bar 30 mm x 10 mm 0,810 Kg/m
    7075 T6 Aluminium Rectangular Bar 40 mm x 10 mm 1,080 Kg/m
    7075 T6 Aluminium Rectangular Bar 50 mm x 10 mm 1,350 Kg/m
    7075 T6 Aluminium Rectangular Bar 60 mm x 10 mm 1,620 Kg/m
    7075 T6 Aluminium Rectangular Bar 80 mm x 10 mm 2,160 Kg/m
    7075 T6 Aluminium Rectangular Bar 100 mm x 10 mm 2,700 Kg/m
    7075 T6 Aluminium Rectangular Bar 200 mm x 20 mm 10,800 Kg/m

     

    7075 T6 Aluminium Round Bar Chemical Composition

    Alloy (ISS) Equivalent alloy (A.A) Copper Magnesium Silicon Iron Managanese Others* (Total) Remarks
    Old New U.S.A Min. Max. Min. Max. Min. Max. Min. Max. Max Max. Aluminum 99.0% Min. 
    — — 7075 1.20 2.0 2.1 2.9 — 0.5 0.7 — 0.3 0.2 Zinc (5.1-6.1) & Chromium (0.2-0.28)

    Aluminium 7075 T6 Round Bar Mechanical Properties

    Typical Mechanical Properties
    Temper Tensile Hardness
      Ultimate Yield Elongation Brinell
      KSI MPA KSI MPA %  
    T6, T651 83 572 73 503 11 150
    T73, T7351 73 503 63 434 13 N/A
    Mechanical Properties of Aluminium 7075-T6 Sheet
    Hardness, Brinell 150 150  AA; Typical; 500 g load; 10 mm ball
    Hardness, Knoop 191 191  Converted from Brinell Hardness Value
    Hardness, Rockwell A 53.5 53.5  Converted from Brinell Hardness Value
    Hardness, Rockwell B 87 87  Converted from Brinell Hardness Value
    Hardness, Vickers 175 175  Converted from Brinell Hardness Value
    Ultimate Tensile Strength 572 MPa 83000 psi  AA; Typical
    Tensile Yield Strength 503 MPa 73000 psi  AA; Typical
    Elongation at Break 11 % 11 %  AA; Typical; 1/16 in. (1.6 mm) Thickness
    Elongation at Break 11 % 11 %  AA; Typical; 1/2 in. (12.7 mm) Diameter
    Modulus of Elasticity 71.7 GPa 10400 ksi  AA; Typical; Average of tension and compression. Compression modulus is about 2% greater than tensile modulus.
    Poisson’s Ratio 0.33 0.33  
    Fatigue Strength 159 MPa 23000 psi  AA; 500,000,000 cycles completely reversed stress; RR Moore machine/specimen
    Fracture Toughness 20 MPa-m½ 18.2 ksi-in½  K(IC) in S-L Direction
    Fracture Toughness 25 MPa-m½ 22.8 ksi-in½  K(IC) in T-L Direction
    Fracture Toughness 29 MPa-m½ 26.4 ksi-in½  K(IC) in L-T Direction
    Machinability 70 % 70 %  0-100 Scale of Aluminum Alloys
    Shear Modulus 26.9 GPa 3900 ksi  
    Shear Strength 331 MPa 48000 psi  AA; Typical
    Alloy Designation UK
    Specifications    		 US
    Specifications    		 US Federal
    Specifications    		 European
    Specifications    		 Other
    7075
    A97075
    A87075    		 BS 2 L95 Alloy 7075-T651
    BS 2 L88 Alloy 7075-T6
    BS L160 Alloy 7075-T73511
    BS L161 Alloy 7075
    BS L162 Alloy 7075
    BS L170 Alloy 7075-T6511 Bars and Sections
    DTD 5110 7075
    DTD 5124 7075 Bars and Sections    		 AMS 4038 7075-T651 Superseded by AMS 4045
    AMS 4039 7075-T651 Superseded by AMS 4049
    AMS 4044 7075 -0 Plate
    AMS 4045 7075-T6 T651
    AMS 4046 7075-T6 T651
    AMS 4048 7075-T0
    AMS 4049 7075 -T6 T651
    AMS 4078 7075-T351
    AMS 4122 7075-T6 Cold finished rod, bar
    AMS 4123 7075-T651 Cold finished bar, rod
    AMS 4124 7075-T7351 Cold finished bar, rod
    AMS 4126 7075-T6
    AMS 4131 7075-T74
    AMS 4139 7075
    AMS 4141 7075-T73
    AMS 4147 7075-T7352
    AMS 4154 7075-T6 Extrusions
    AMS 4166 7075-T73 Extrusion
    AMS 4167 7075-T73511 Extrusions
    AMS 4168 7075-T6511 Extrusions Unstraightened
    AMS 4169 7075-T6511 Extrusions Straightened
    AMS 4174 7075-T73
    AMS 4186 7075-TF Cold finished bar, rod
    AMS 4187 7075-0 Cold finished bar    		 QQ-A-250/13 7075-0
    QQ-A-250/13 7075-T6
    QQ-A-250/18 7075-0
    QQ-A-250/18 7075-T6
    QQ-A-250/24 7075-T7651
    QQ-A-250/25 7075 7072-T76
    QQ-A-250/26 7075 7011-T76
    QQ-A-367 Alloy 7075-T6
    MIL-A-22771    		 EN 2127 AIR 9048.690 7075-T7351
    AIR 9048.700 7075-T7351
    AIR 9048.710 7075-T7351
    AIR 9049

    Key Words: Aluminium 7075-T6; Aluminium 7075-T651, UNS A97075; ISO AlZn5.5MgCu; Aluminium 7075-T6; Aluminium 7075-T651; AA7075-T6

    AMS Aluminium Alloy Form UNS Specification
    4122 Aluminium Alloy 7075 T6 Roundbar, Rods, Wire, Hot rolled, or Cold drawn A97075 ./.
    4123 Aluminium Alloy 7075 T651 Roundbar, Rods, Wire, Hot rolled, or Cold drawn A97075 SAE -QQ-A-225/9 T651
    4124 Aluminium Alloy 7075 T7351 Roundbar, Rods, Wire, Hot rolled, or Cold drawn A97075 FED-QQ-A-225/9 T7351
    4126 Aluminium Alloy 7075 T6 Roundbar, Rods, Wire, Hot rolled, or Cold drawn A97075 ./.
    4131 Aluminium Alloy 7075 T74 Roundbar, Rods, Wire, Hot rolled, or Cold drawn A97075 MIL-A-22771
    4139 Aluminium Alloy 7075 T6 Roundbar, Rods, Wire, Hot rolled, or Cold drawn A97075 ./.
    4141 Aluminium Alloy 7075 T73 Roundbar, Rods, Wire, Hot rolled, or Cold drawn A97075 ./.
    4147 Aluminium Alloy 7075 T7352 Roundbar, Rods, Wire, Hot rolled, or Cold drawn A97075 MIL-A-22771
    4154 Aluminium Alloy 7075 T6 Roundbar, Rods, Wire, Hot rolled, or Cold drawn A97075 FED-QQ-A-200/11 T6
    4166 Aluminium Alloy 7075 T73 Roundbar, Rods, Wire, Hot rolled, or Cold drawn A97075 SAE -QQ-A-200/11 T73
    4167 Aluminium Alloy 7075 T73511 Roundbar, Rods, Wire, Hot rolled, or Cold drawn A97075 FED-QQ-A-200/11 T73511
    4168 Aluminium Alloy 7075 T6510 Roundbar, Rods, Wire, Hot rolled, or Cold drawn A97075 SAE -QQ-A-200/11 T6510
    4169 Aluminium Alloy 7075 T6511 Roundbar, Rods, Wire, Hot rolled, or Cold drawn A97075 SAE -QQ-A-200/11 T6511
    4174 Aluminium Alloy 7075 T73 Roundbar, Rods, Wire, Hot rolled, or Cold drawn A97075 ./.
    4186 Aluminium Alloy 7075 F Roundbar, Rods, Wire, Hot rolled, or Cold drawn A97075 ./.
    4187 Aluminium Alloy 7075 T0 Roundbar, Rods, Wire, Hot rolled, or Cold drawn A97075 ASTM B211
    4310 Aluminium Alloy 7075 T651 T652 Roundbar, Rods, Wire, Hot rolled, or Cold drawn A97075 ./.
    4311 Aluminium Alloy 7075 T7351/7075 Roundbar, Rods, Wire, Hot rolled, or Cold drawn A97075 ./.
    4323 Aluminium Alloy 7075 T7452 Roundbar, Rods, Wire, Hot rolled, or Cold drawn A97075 ./.

    Aluminum Alloy Heat Treatment Temper Designations for Round Bars

    Basic Aluminum Heat Treatment Designations

    • F As Fabricated
    • O Annealed
    • H Strain Hardened
    • W Solution Heat Treated
    • T Solution Heat Treated

    Heat Treating T Temper Codes for Aluminium 7075 T6 Round Rods

    • T1 – Cooled from an elevated temperature shaping process and naturally aged to a substantially stable condition.
    • T2 – Cooled from an elevated temperature shaping process, cold worked, and naturally aged to a substantially stable condition.
    • T3 – Solution heat treated, cold worked, and naturally aged to a substantially stable condition.
    • T4 – Solution heat treated, and naturally aged to a substantially stable condition.
    • T5 – Cooled from an elevated temperature shaping process then artificially aged.
    • T6 – Solution heat treated then artificially aged.
    • T7 – Solution heat treated then overaged/stabilized.
    • T8 – Solution heat treated, cold worked, then artificially aged.
    • T9 – Solution heat treated, artificially aged, then cold worked.
    • T10 – Cooled from an elevated temperature shaping process, cold worked, then artificially aged.

    Additional digits may be used after the first T temper digit to indicate subsequent stress relieving by processes such as stretching, compressing, or a combination.

    H Temper Strain Hardening Codes for Aluminium 7075 T6 Bars

    • H1 – Strain hardened only
    • H2 – Strain hardened and partially annealed
    • H3 – Strain hardened and stabilized
    • H4 – Strain hardened and lacquered or painted. This assumes that thermal affects from the coating process affect the strain hardening; seldom encountered.

    Application of 7075 T6 Aluminium Rod/ Round Bar

    7075 T6 Aluminium Round Bar is the most widely used form of Industrial Aluminium. 7075 T6 Aluminium Rods find applications in various industries such as manufacturing cans and packages, transportation, home appliances, building and construction.

    Application of 7075 T6 Aluminium Bar

  • Previous:
  • Next:

    • Related Products

    6066 T6 Aluminium Sheet

    6066 T6 Aluminium Sheet

    2014 T6 Aluminium Plate

    2014 T6 Aluminium Plate

    Aluminium Sheet Grade 52000

    Aluminium Sheet Grade 52000

    5086 Aluminium Tube

    5086 Aluminium Tube

    2024 Aluminium Plate

    2024 Aluminium Plate

    19500 Aluminium Plate

    19500 Aluminium Plate