Inconel 600 Sheet Plate

Short Description:

Inconel 600, also known as Inconel 600 Alloy or Alloy 600, is a high-strength, heat-resistant nickel-chromium alloy.

Specification:ASTM B168 UNS N06600

Thickness:0.1mm to 100 mm Thk

Width:10-2500mm

Hardness:Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Send email to us Download as PDF

Product Detail

Product Tags

Inconel 600 plates and sheets are often supplied in the annealed condition, which provides them with optimal properties for further processing or fabrication. However, they can also be obtained in other conditions such as solution annealed or age hardened, depending on the specific application requirements.

Inconel Alloy 600 AMS 5540, ASTM B168:

Inconel 600 Sheet ASTM Specification	ASTM B168 UNS N06600, ASME SB168
Alloy 600 Plate Specification	MSRR, AMS, BS, ASTM B168 / ASME SB168
Inconel 600 Plate Length & Sizes	1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2m, 2.44m, 3m, 36″ X 120″ or 48″ X 144″, Cut to size available
Inconel 600 Plate Thickness	0.1mm to 100 mm Thk
Inconel 600 Plate Width	10-2500mm
Inconel 600 Sheet AMS	AMS 5540
Inconel 600 Sheet Hardness	Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Temper	Annealed
Condition	Polished on both sides
Inconel 600 Plate Finish	Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Inconel 600 Plate Stock in form of	Alloy 600 Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate
Inconel 600 Plate ASTM Standard	ASTM A162, GB/T2054, DIN177502002, ASTM B127, ASTM B435, ASTM B582, ASTM B575, ASTM B168, ASTM B443, ASTM B463, ASTM B626, ASTM B536, etc
Inconel 600 Plate Dimensions	As the customer required
High Quality Inconel 600 Sheet	Huge Stock, Timely delivery Raw Materials Certificate EN 10204/3.1B 100% Radiography Test Report High special strength, high melt point Third Party Inspection Report, etc Excellent corrosive resistance, good thermal resistance Customer support after-sales service Strict Control from Raw Material to Finished Inconel 600 plate
Inconel 600 profiling	To provide a full profiling service we use numerous profiling methods including: Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting
Specialized in	Inconel 600 Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width Inconel 600 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width Inconel 600 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width Inconel 600 Clad plate: Inconel 600 Clad plate is a composite steel plate made by bonding Inconel 600 plate, etc.

TYPE OF INCONEL 600 PLATES / SHEETS/COIL:

•Alloy 600 Sheets
•UNS N06600 Sheets
•ASTM B168 Inconel 600 Sheets
•ASME SB168 Alloy 600 Sheets

•Alloy 600 Plates
•UNS N06600 Plates
•ASTM B168 Inconel 600 Plates
•ASME SB168 Alloy 600 Plates

•Alloy 600 Chequered Plate
•UNS N06600 Chequered Plate
•ASTM B168 Inconel 600 Chequered
•ASME SB168 Alloy 600 Chequered

•Alloy 600 Rolls
•UNS N06600 Rolls
•ASTM B168 Inconel 600 Rolls
•ASME SB168 Alloy 600 Rolls

•Alloy 600 Shim Sheet
•UNS N06600 Shim Sheet
•ASTM B168 Inconel 600 Shim Sheet
•ASME SB168 Alloy 600 Shim Sheet

•Alloy 600 Perforated Sheet
•UNS N06600 Perforated Sheet
•ASTM B168 Inconel 600 Perforated
•ASME SB168 Alloy 600 Perforated

Inconel 600 Plate, Sheet & Coil Chemical Composition:

Grade	C	Mn	Si	S	Cu	Fe	Ni	Cr
Inconel 600	0.15 max	1.00 max	0.50 max	0.015max	0.50 max	6.00 – 10.00	72.00 min	14.00 – 17.00

Alloy 600 Sheets, Plates & Coils Mechanical Properties:

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Inconel 600	8.47 g/cm3	1413 °C (2580 °F)	Psi – 95,000 , MPa – 655	Psi – 45,000 , MPa – 310	40 %

Equivalent Grades for Inconel 600 Sheets & Plates:

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
Inconel 600	2.4816	N06600	NCF 600	NA 13	МНЖМц 28-2,5-1,5	NC15FE11M	NiCr15Fe

Inconel 600 Sheet, Plate Stock List:

Alloy	Product form	Dimension
INCONEL 600 (75 Ni/16 Cr)	Strip; cold rolled, annealed	0.10×150 mm x coil, 0.12 kg/m
ALLOY 600 (75 Ni/16 Cr)	Strip; cold rolled, annealed	0.40×200 mm x coil, 0.7 kg/m
INCONEL 600 (75 Ni/16 Cr)	Sheet; cold rolled, annealed	0.4×914.4 mm x coil, 3.03 kg/m
INCONEL 600 (75 Ni/16 Cr)	Sheet; cold rolled, annealed	0.5×1000 mm x coil, 4.14 kg/m
INCONEL 600 (75 Ni/16 Cr)	Sheet; cold rolled, annealed	0.7x1000x2000 mm, 13.25 kg/pc
INCONEL 600 (75 Ni/16 Cr)	Sheet; cold rolled, annealed	0.8×1219 mm x coil, 8.1 kg/m
ALLOY 600 (75 Ni/16 Cr)	Sheet; cold rolled, annealed	1.0×1220 mm x coil, 10.10 kg/m
INCONEL 600 (75 Ni/16 Cr)	Sheet; cold rolled, annealed	1.2x1200x3000 mm, 37.8 kg/pc
INCONEL 600 (75 Ni/16 Cr)	Sheet; cold rolled, pickled, annealed	1.6x1220x3600 mm, 59 kg/pc
ALLOY 600 (75 Ni/16 Cr)	Sheet; cold rolled, annealed	2.0x1200x3000 mm, 62 kg/pc
INCONEL 600 (75 Ni/16 Cr)	Sheet; cold rolled, annealed, pickled	2.5x1200x3000 mm, 76 kg/pc
ALLOY 600 (75 Ni/16 Cr)	Sheet; cold rolled, soft annealed, descaled, sheared, tread plate, Checker Plate	3.0x1220x3000 mm, 92 kg/pc
ALLOY 600 (75 Ni/16 Cr)	Plate; hot rolled, annealed	4.0x1200x3000 mm, 122 kg/pc
ALLOY 600 (75 Ni/16 Cr)	Plate; hot rolled, annealed	5.0x2400x6000 mm, 606 kg/pc
ALLOY 600 (75 Ni/16 Cr)	Plate; hot rolled, soft annealed, descaled, sheared, tread plate, Checker Plate	6.0x2440x6000 mm, 746 kg/pc
INCONEL 600 (75 Ni/16 Cr)	Plate; hot rolled, descaled, annealed	8.0x2000x4000 mm, 564 kg/pce
ALLOY 600 (75 Ni/16 Cr)	Plate; hot rolled, soft annealed, descaled, sheared, tread plate, Checker Plate	10.0x2000x4000 mm, 726 kg/pc
ALLOY 600 (75 Ni/16 Cr)	Plate; hot rolled, soft annealed, descaled, sheared, tread plate, Checker Plate	12.0x2000x3000 mm, 616 kg/pc
INCONEL 600 (75 Ni/16 Cr)	Plate; hot rolled, annealed	20.0x915x1235 mm, 193 kg/pc

Why Choose Us:

1. You can get the perfect material according to your requirement at the least possible price.

2. We also offer Reworks, FOB, CFR, CIF, and door to door delivery prices. We suggest you to do deal for shipping which will be quite economical.
3. The materials we provide are completely verifiable, right from raw material test certificate to the final dimensional statement.(Reports will show on requirement)
4. e guarantee to give a response within 24hours(usually in the same hour)
5. You can get stock alternatives, mill deliveries with minimizing manufacturing time.
6. We are fully dedicated to our customers. If it will not possible to meet your requirements after examining all options, we will not mislead you by making false promises which will create good customer relations.

Packing:

1. Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging.

2. Sasa alloy’s pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as,