Nimonic 105 Sheet Plate

Short Description:

Specification:  ASTM B463 UNS , ASME SB463

Thickness:  0.1mm to 100 mm Thk

 Width:  10-2500mm

Hardness:  Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.


Product Detail

Product Tags

Nimonic 105 Plate supplier, Nimonic 105 Polished Plate, Nimonic 105 Coil Suppliers in China, Nimonic 105 plate price in China, Nimonic Alloy 105 strip distributor, Nimonic 105 cold rolled plate stockist in China, Nimonic Alloy 105 Plate Stockist.

Nimonic 105 Plate from Special Metals is a NIMONIC ® alloy, available in the following form including Nimonic 105 Shim, Nimonic Alloy 105 Plate, Nimonic 105 Rolling Plate, Nimonic 105 Flat Shim, Nimonic 105 Perforated Plate, Nimonic 105 Hot rolled Plate and Nimonic 105 Cold rolled Plate. These Alloy 105 Plates & Nimonic 105 Sheet are best to use in high temperatures environments and severe mechanical stress, and also in cases where high surface stability is needed. It is always recommended that heavy duty machining equipment and tooling should be used before Nimonic 105 Clad Plate cutting is performed, this help to reduce chatter or work-hardening of Nimonic 105 Rolling Sheets. During high speed operations such as grinding, turning, or milling, water-base coolants are suitable for Nimonic 105 Flat Sheet.

NIMONIC 105 PLATE SPECIFICATION:
Nimonic 105 Sheet ASTM Specification ASTM B463 UNS , ASME SB463
Nimonic Alloy 105 Plate Specification MSRR, AMS, BS, ASTM B463 / ASME SB463
Nimonic 105 Plate Length& Sizes 1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2m, 2.44m, 3m, 36″ X 120″ or 48″ X 144″, Cut to size available
Nimonic 105 Plate Thickness 0.1mm to 100 mm Thk
Nimonic 105 Plate Width 10-2500mm
Nimonic 105 Sheet AMS AMS
Nimonic 105 Sheet Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Temper Annealed
Condition Polished on both sides
Nimonic 105 Plate Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Nimonic 105 Plate Stock in form of Nimonic Alloy 105 Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate
Nimonic 105 Plate Dimensions As the customer required
High Quality Nimonic 105 Sheet
  • Huge Stock, Timely delivery
  • Raw Materials Certificate
  • EN 10204/3.1B
  • 100% Radiography Test Report
  • High special strength, high melt point
  • Third Party Inspection Report, etc
  • Excellent corrosive resistance, good thermal resistance
  • Customer support after-sales service
  • Strict Control from Raw Material to Finished Nimonic 105 plate
Nimonic 105 profiling To provide a full profiling service we use numerous profiling methods including:

  • Plasma Plate Cutting
  • Laser Plate Cutting
  • Oxy-propane Flame Cutting
Specialized in
  • Nimonic 105 Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width
  • Nimonic 105 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width
  • Nimonic 105 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width
  • Nimonic 105 Clad plate: Nimonic 105 Clad plate is a composite steel plate made by bonding Nimonic 105 plate, etc.
  • Free Quote, Inquiry answered within 8 hours

 

Nimonic® 105 Plate Chemical Composition:
Element Content (%)
Nickel, Ni 51
Cobalt, Co 18-22
Chromium, Cr 14-15.7
Molybdenum, Mo 4.50-5.50
Aluminum, Al 4.50-4.90
Iron, Fe  1
Manganese, Mn  1
Silicon, Si  1
Titanium, Ti 0.90-1.50
Copper, Cu 0.20
Zirconium, Zr  0.15
Carbon, C  0.12
Sulfur, S  0.010
Boron, B 0.0030-0.010

 

Nimonic® 105 Plate Physical Properties:
Properties Metric Imperial
Density 8.01 g/cm³ 0.289 lb/in³
Melting point 1327°C 2420°F

 

Nimonic® 105 Plate Mechanical Properties:
Properties Metric Imperial
Tensile strength (precipitation hardened, value at room temperature) 1150 MPa 167000 psi
Yield strength (precipitation hardened, value at room temperature, @strain 0.200%) 770 MPa 112000 psi
Elongation at break (precipitation hardened) 25% 25%

 

Nimonic® 105 Plate Thermal Properties:
Properties Metric Imperial
Thermal expansion co-efficient (@20-100°C/68-212°F) 12.2 µm/m°C 6.78 µin/in°F
Thermal conductivity 10.89 W/mK 75.58 BTU in/hr.ft².°F

Other Designations

Equivalent materials to Nimonic 105™ includes DIN 2.4634.

Nimonic® 105 Plate Annealing

Nimonic 105™ can be solution heat treated at 1149°C (2100°F) and then cooled in air.

 

APPLICATIONS:

Sasa alloy is Nimonic 105 plate are suitable for Aerospace, Plant manufacturing, Machine engineering, Power generation and Nuclear Power Plant etc. We are supplying high quality Nimonic 105 Sheet to our clients globally.


  • Previous:
  • Next:

  • Related Products