Titanium Gr.2 Wire
Sasa Alloy Titanium Grade 1’s properties and chemical composition are very similar to Grade 2, but with tighter controls on O, Fe and H contents.
Available in Round wire, Bars or lengths & Flat wire, Titanium Grade 1 is also known as Timetal 35A, Titan Grade 1, and Allvac 30.
ASTM B863 Titanium Gr.2 Wire Specification:
Specifications : ASTM B863,GB/T 3623-2007 AWS A5.16
Grade : TA1 TA2 TA3 TC4 GR1 GR2 GR5 GR7 GR9 GR12
Diameter : 0.10 mm to 10.0 mm
Type : Filler Wire, Coil Wire, Electrode Wire, Welding Wire.
Condition: Anneal, Cold Drawn & Polished Cold Drawn, Centreless Ground & Polished
Form : Round, Square, Hex (A/F), Rectangle, Forging Etc.
End : Plain End, Beveled End
ASTM B863 Gr.2 Titanium Wire Equivalent Grades:
| NAME | WERKSTOFF NR. | UNS |
| Titanium Grade 2 | 3.7035 | R50400 |
Titanium ASTM B863 Gr 2 Wire Chemical Composition and Mechanical properties:
| Grade | C | O | Fe | H | N |
| Gr.2 | 0.10max | 0.025 max | 0.30 max | 0.015 max | 0.30 max |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 4.5 g/cm3 | 1665 °C (3030 °F) | Psi – 49900 , MPa – 344 | Psi – 39900 , MPa – 275 | 20% |
ASTM B863 Gr.2 Titanium Wire Surface finish:
|
CD
|
Cold drawn
|
P
|
Polished
|
|
BD
|
Bright drawn
|
SRE
|
Slit rolled edge
|
|
CG
|
Centreless ground
|
HF
|
Hot finished
|
|
CF
|
Cold finished
|
HRAP
|
Hot rolled annealed and pickled
|
|
P&T
|
Peeled and turned
|
RT
|
Rough turned/peeled
|
|
ST
|
Smooth turned
|
PR
|
Peeled and reeled
|
Why Choose Us :
1. You can get the perfect material according to your requirement at the least possible price.
2. We also offer Reworks, FOB, CFR, CIF, and door to door delivery prices. We suggest you to do deal for shipping which will be quite economical.
3. The materials we provide are completely verifiable, right from raw material test certificate to the final dimensional statement.(Reports will show on requirement)
4. e guarantee to give a response within 24hours(usually in the same hour)
5. You can get stock alternatives, mill deliveries with minimizing manufacturing time.
6. We are fully dedicated to our customers. If it will not possible to meet your requirements after examining all options, we will not mislead you by making false promises which will create good customer relations.
Sasa alloy’S Quality Assurance (including both Destructive and Non-Destructive) :
1. Visual Dimension Test
2. Mechanical examining like tensile, Elongation and reduction of area.
3. Ultrasonic test
4. Chemical examination analysis
5. Hardness test
6. Pitting protection test
7. Penetrant Test
8. Intergranular Corrosion Testing
9. Impact analysis
10. Metallography Experimental Test
Sasa alloy’S Packaging:
1. Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging.
2. Sasa alloy’s pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as,
ASTM B863 Gr.2 Titanium Wires Application:
Aerospace
Automotive
Chemical Processing
